Skip navigation

Replacing standard front suspension

Submitted by satans_creation.

First off you need some parts

Attachment
1.jpg
4051 views (185 Kb)


2 strut housing's from here http://www.classic-vw.co.uk/mk1-golf-powder-coated-front-strut-housing-1046-p.asp these are great value for money

Attachment
2.jpg
1574 views (193 Kb)


2 new gas strut inserts from here http://www.ebay.co.uk/itm/301003042793

Attachment
3.jpg
1128 views (78 Kb)


2 new coil springs http://www.eurocarparts.com/ecp/c/Volkswagen_Golf+Cabriolet_1.8_1990/p/car-parts/suspension-and-steering/suspension/coil-spring/?627443850

Attachment
4.jpg
1209 views (206 Kb)


bump stops caps x2 http://www.gsfcarparts.com/457vg0160

bump stops x2 http://www.ebay.co.uk/itm/FEBI-08384-VW-Golf-1-8-Injection-MK-1-84-93-CONV-BUMP-STOP-FR-/190980003170

Attachment
5.jpg
2474 views (48 Kb)


2 new top mounts http://www.ebay.co.uk/itm/FEBI-07359-VW-Golf-1-8-INJ-MK1-84-93-CONV-STRUT-TOP-MOUNT-KIT-FR-LH-RH-/190981549457



Take the front wheel off on whichever side your starting on and support with an axle stand.

Before taking the 2 bolts out of the bottom of the strut clean with a wire brush and mark with a paint pen the position of the strut so you dont mess the tracking up. Then remove the two bolts.

Attachment
6.jpg
2302 views (79 Kb)


Attachment
7.jpg
1023 views (83 Kb)


Remove the brake line and then the two 13mm nuts holding the top mount

Attachment
8.jpg
1408 views (70 Kb)


Attachment
9.jpg
1448 views (48 Kb)


The strut should now be free, use spring compressors to avoid a broken nose, making sure you have compressed the springs tension. Use an allen key and spanner to release the top mount

Attachment
10.jpg
4236 views (197 Kb)


Attachment
11.jpg
1614 views (142 Kb)


Attachment
12.jpg
1347 views (89 Kb)


You should now compress your new spring and do the reversal of what you just did. If your reusing your old strut housing you will need to remove the shock absorber cap.

Attachment
13.jpg
1297 views (71 Kb)


compress the new spring refit the top mount, not forgetting the bump stop and cap.

Attachment
14.jpg
2794 views (160 Kb)


Make sure when putting the strut back on the car it lines up with the paint or mark you made earlier

Attachment
15.jpg
1538 views (67 Kb)


Just the other side to go…………..

Now go for a drink chill out, jobs a good un.

I know the parts are from different places because that's where I found them the cheapest. No one place sells all the parts and if they did they seem to be over pricing one or two items.

There are no pages beneath this page

There are no posts yet