Throttle Body
Use a 16V spec throttle body, preferably the one that matches the injection system being used (K-Jet, KE-Jet etc) as it will have the correct connections and spec. i.e. if K-Jet mk1 KR ECU etc used then use KR (K-Jet) 16V T/B.
The 9A T/B has a Throttle position sensor on the bottom. This is of no use if running K-Jet but if you plan on running aftermarket or more advanced management than KJet (like the 9A native KE-Jet, Emerald, DTA, Mega squirt etc) then it will be required. It WILL work with K-jet, but as it's intended to run with management it has no bleed screw to control idle, this can be added if required.
The 9A T/B has a Throttle position sensor on the bottom. This is of no use if running K-Jet but if you plan on running aftermarket or more advanced management than KJet (like the 9A native KE-Jet, Emerald, DTA, Mega squirt etc) then it will be required. It WILL work with K-jet, but as it's intended to run with management it has no bleed screw to control idle, this can be added if required.
There are no pages beneath this page
There are no posts yet