Gear Linkage Change (Page 4)
16. You can now slide this out completely.
17. Replace the bushes at both ends of the rod. First, push them out with a screwdriver.
18. Remove the old bush (picture 18a) and grab a nice new one (picture 18b).
19. Push the bush in by hand, make sure it's lined up flat and then give it a firm press with the thumb, a little stiff but nothing too difficult.
20. Next up, remove the cover plate next to the ball / cage mentioned in step 3, this is a single 13mm nut.
17. Replace the bushes at both ends of the rod. First, push them out with a screwdriver.
18. Remove the old bush (picture 18a) and grab a nice new one (picture 18b).
19. Push the bush in by hand, make sure it's lined up flat and then give it a firm press with the thumb, a little stiff but nothing too difficult.
20. Next up, remove the cover plate next to the ball / cage mentioned in step 3, this is a single 13mm nut.
Child pages:
- Gear Linkage Change (Page 5) (1 child)
There are no posts yet