A few people have asked me about my jig that I made for my project a few years ago
So hopefully this should provide you the info needed to make your own
My jig is a bit different because of the offset where it bolts into the bumpers, This means the shell remains low to the ground at all times making it perfect working height and very stable. Some jigs on the market have a simple straight bar which would mean the car would be very unstable and always wanting to turn over
Material
50mm x 50mm L section 5mm Wall 50mm x 50mm Box Section 3mm Wall 5mm Plate optional 40mm Bar 50mm Tube 5mm Wall M10 Zinc Bolts 2x M20 Thread Bar + 4 nuts and washers
all in all the a material cost £100 using new material not scrap
So here are some pictures of the finished item
Here are the drawings that I produced to get these manufactured but unfortunately the cost was too high to make it worth while. So that never happened
You don't have to have the items like the locking plates, I simply clamp the bracket to the A frame which held the car in the correct place
Hopefully this is of some help to some of you it help me a lot and save me around the cost of buying one around £250
