Skip navigation

my latest project

Post

Back to the top
One

Last edit: by abfmk1

Post

Back to the top
Sounds like a plan!  :lol:
Cornish Host.
1980 VW Derby
Clive the Cabby
Ujum the Invisible
Mynx the  Tintop

Post

Back to the top
So not touched this in a good while, now hoping to start again so bought this,   Chinese k04, time will tell if its any good.

Post

Back to the top
DSCF1527.JPG

Post

Back to the top
Also made.
 

Last edit: by abfmk1

Post

Back to the top
Nice new parts  :thumbs:

Matt

Post

Back to the top
Bought a pair of G60 calipers, they are rusty, half painted red, over the rust,  and a bleed nipple snapped of while trying to undo it,  Lets see what I can do.  Photo of one.
DSCF1538.JPG
DSCF1539.JPG

Post

Back to the top
So after a combination of deox c and various wire brush,s in an electric drill and several hours, came up quite nice,  Just need a few coats of caliper paint and I do have new pistons and seals to fit.
DSCF1550.JPG
DSCF1551.JPG

Post

Back to the top
It's amazing how well calipers come up with a bit of elbow grease. They'll look great once painted  :thumbs:

Matt

Post

Back to the top
Yeah, the advantage of thick metal, as opposed to doing bodywork.  At the moment attempting to fit the new pistons and rubber seals,  while I have done it rather easily on another pair of callipers, this pair is very close to feeling the weight of my sledge hammer,   will just not go together.  EDIT  Got there in the end, second one was easier.
 

Last edit: by abfmk1

Post

Back to the top
DSCF1555.JPG

Post

Back to the top
Sold calipers on

Last edit: by abfmk1

Post

Back to the top
123
45 mm dth jenveys.

Last edit: by abfmk1

Post

Back to the top
As i am now committed to  1.8t  thought i would get some parts, 

Last edit: by abfmk1

Post

Back to the top
123

Last edit: by abfmk1

Post

Back to the top
:thumbs:
Cornish Host.
1980 VW Derby
Clive the Cabby
Ujum the Invisible
Mynx the  Tintop

Post

Back to the top
After getting the g60 calipers sorted and the epytec adaptors i sold them on , just thought they were too heavy and bought some standard mk1 calipers which i overhauled.

Post

Back to the top
DSCF1988.JPG DSCF1954.JPG
DSCF1955.JPG

Post

Back to the top
.  However then sold these on

Last edit: by abfmk1

Post

Back to the top
123

Last edit: by abfmk1

0 guests and 0 members have just viewed this: None.