G60 into mk1 guide

Koen, read page 2, the guide is now added as a 'post'. Read through it and you'll have the complete guide with the pics!!!
:-)

tried the link several times and it keeps saying the info is no longer available is there any where else i can find it or can some one email it to me thanks

Hi there, do you still build the looms? If so how much?

Many Thanks.

Danjoeper

Just done the G60 conversion, fired up for the first time yesturday, engine been sitting doing nothing for 14 months, would of started first time if the coil lead was connected lol, i used a modified nissan pulsar intercooler as its small enough so i can fit my twin headlamps if anyone want me to post some pics of the intercooler mods let me know.. Still got stuff to do like making brackets for the cooler and rad and make the bay a bit neater.

Missed the first start of the car but i managed to get the second start, the exhaust is not connected with the system yet G60 Mk1

I want this guide!
None of the links work
Anyone help?
Ta
Alex

The guide is now on PG2

Hi have tried to email you but no response, wanted you to check harness & put any errors right as there are too many wires left over???? :roll:  let me know if you have time & i will post etc.
Cheers

Hello mate....what did the std gti gearbox feel like to drive? and what did it top out at?

I used a gearbox off a mk2 carbed scirocco.
Top end was around 130mph which is plenty in a mk1

I've been getting lots of emails about making looms.
I have now started to make these again in my spare time.

Price is £100 and you supply both looms,In return you get a loom made up from both looms which is plug and play all you need to do is connect 1 wire to an ignition live for the ecu and that's it.Turnaround is normally 2 weeks depending on how many I have at any one time.

your a genius

Paul im not sure if my pms are working.

I live in australia i have one of the only g60s in oz and could really use your help with a loom it would be a relief to have experienced person do it so i can concentrate on the conversion. If you dont do it anymore please tell me and ill work it out thankyou for this guide your a big help anyway.

hi all, I am new to this and all ready wanting to upgrade the engine.
is the G60 easy enough for a complete novice to fit and how long will it take me?

hi there just after some more pics of the intercooler mounting and piping as its a little vague ,and is there only on type of td5 intercooler ? but thanks for the great info .

evening all!

first post!

ime currently doing this conversion for a friend, i notice you say about swapping the flywheel and clutch, why is this necessary? surely if you use the g60 box then this isnt a problem?

No but then you need to buy new gearbox mounts and fit shifter cables as well so another £200 bill

ah ok then so best bet is original box in that case? its a  mk1 cabbie by the way

forget that ^^^

decided to stick with the o2a box now

just tried to read this but it says the file is no longer available publicly??

jasonO said

Paul im not sure if my pms are working.

I live in australia i have one of the only g60s in oz and could really use your help with a loom it would be a relief to have experienced person do it so i can concentrate on the conversion. If you dont do it anymore please tell me and ill work it out thankyou for this guide your a big help anyway.

Your No Longer the only ozi with a g60 - wer about in oz u from ?