Skip navigation

Mk2 Golf 20v turbo, car is now near complete

Post

Back to the top

Built to go not for show

Since my old phone broke on throu to the other side my pics of my build were almost lost.. Iv managed to get some but not all…  Iv never done build threads but there a great idea to diary any progress and keep a record of work done.. 
This one kind of defeats the purpose as its built but technically its not 100% finished…

I bought this car for £350. I wanted any colour apart from red and an original big bumper model. This was neither, but the body was rock solid and at that money I couldn't a say no…

This was the car receiving its first clean and polish and I put a set of bbs ra on it and a single lamp grill to see what it was like.
My buddy Andy helping out👍


Cross hair lights I had as the clears were done

The paint came up amazing using G3 products I was well chuffed and the tornado started to grow on me.

This was the bay

So after I got the car cleaned up the strip down began

Post

Back to the top
So with oil leaks and a burst power steering the bay was full of kak but I think this helped with the preservation lol
Subframe off

All other parts off

Doner car bought for £190



Then the cleaning and painting began



Clutch master cylinder and passat pedal box in

Post

Back to the top
Bay cleaned with cleaned subframe back in new eibach and power flex bushes 

Inner arches cleans and painted up


Wishbones on

Started cleaning up the cross member


Cross member in with new front brake lines
Corrado steering rack and boot plus the mk4 golf shifter tower

Post

Back to the top
Some new parts in the waiting

Hubs with there new bearings waiting to go in

Anti roll bar links being cleaned for new bushes


G60 brakes nearly brand new black diamond disks ready for clean up

Strut tower being drilled for compbrake solid top mounts

Removing uneven seam sealer using heat and a chisel

Removed

Have a bit seam sealer to repair on this side but il get that.


Brakes painted and on with the new ball joints and track rods

Goodridge hoses on


G60 arch on

Post

Back to the top
Recaros in

And dash stripped for wiring and pedal box assembly

New side skirts clips and and sticker strip



Il post some more up when I manage to find them

Post

Back to the top
Cheeky snap of the front first

Post

Back to the top
Nice work so far. Those Recaros look comfy!  :cool:

Andy

LINCOLNSHIRE REGION - https://www.facebook.com/groups/467122313360002/

1983 MK1 Golf GTI Campaign Model - Under (looooong) resto!
1962 Rover P4 80
2002 BMW 745i
2008 BMW Z4 2.5Si

Post

Back to the top
Very nice work indeed mate. What's the engine spec? Standard?

Post

Back to the top

Hairyarse said

Nice work so far. Those Recaros look comfy!  :cool:

The back seats are even better.. It's a corrado rear bench and there super snug.. Plus there's no rubbing with 3 in the back :thumbs: 

Post

Back to the top

smudger1980 said

Very nice work indeed mate. What's the engine spec? Standard?

Cheers mate.. Engine is a stock 225 BAM only mods in there are 4.5bar fpr, forge tip, k&n cyclone, 2.0L tfsi coilpacks, fmic, straight throu 2.5" stainless exhaust, qpeng downpipe, emerald ecu with 3 interchangeable maps plus flat shift, stage 2 clutch, tech edge wideband lambda and soon to fit a Collins actuator and Collins bov.

Post

Back to the top
Nice spec. Not quite standard then ;)

Is a 4.5bar fpr needed? I thought 4bar was more than enough for modding that engine?

Post

Back to the top
:thumbs:

Post

Back to the top

smudger1980 said

Nice spec. Not quite standard then ;)

Is a 4.5bar fpr needed? I thought 4bar was more than enough for modding that engine?

Think its a 4.5 I would need to look again but when they get mapped it all gets sorted out then :)

Post

Back to the top

golf_coupe said

 :thumbs:

Cheers daz 

Post

Back to the top
Come rain or shine…
My mate come down with the old faithful:) garage door had to be taken off to get the lump out to..
Standard g60 fly there which was brand new vag as the lightened one i paid a fortune for from America was causing problems.

In it goes
 
Home sweet home

Lost a lot of pics but fwd now and got a seat Toledo tdi twin fan radiator in there, lucky find in the scrappies… It's huge and fits factory mounts
Fmic on and in place..
I cut out the lower part of the front panel bolted this in place the my mate welded a tubed braket to the front cross member then that got bolted to the underside of the fmic.. Painted up bottles in. Fits snug

Post

Back to the top
Very nice indeed mate. Top work. Bet it flys :)

Post

Back to the top
Top work there - fits perfect and looks spot on in the engine bay ;)

Andy

LINCOLNSHIRE REGION - https://www.facebook.com/groups/467122313360002/

1983 MK1 Golf GTI Campaign Model - Under (looooong) resto!
1962 Rover P4 80
2002 BMW 745i
2008 BMW Z4 2.5Si

Post

Back to the top
didnt know flower was givin you a hand with this :ninja:

Post

Back to the top

golf_coupe said

didnt know flower was givin you a hand with this :ninja:

Thought I would put his nosing to good use  :lol: he supplied the hoist and the flaring kit..  I never got much of a hand but he helped me out doing the brake lines and bleeding them. Was pretty much 3 cold months of loneliness mate :cool:

Post

Back to the top




This is how its sitting for now


Feeling sorry for itself in need of a good clean


Cant wait for the day when back to black is all  that's on my mind:)
0 guests and 0 members have just viewed this: None.