At Last
Posted
#1246633
(In Topic #149187)
Settling In

At Last
Just spent an hour introducing my new Mk1 that I am extremely proud of for my computer to crash and loose the lot
So Finally found the Mk1 I've been looking for - been hard graft doing just that too, I wanted one that some talented person not like myself had put Blood Sweat and Tears into the bodywork as in all honesty if I attempted this I reckon it would only be good for scrap
My talent (the little I do posess) lies with the engine, electrics and interior
Where do I start??? What was done to the body:
Complete bare metal strip and respray including engine bay (roman Bronze - acquired taste but one I quite fancy)
New front wings
New Front Panel
Both New Sills
New Scuttle
Both Rear Arches new and pulled out by 2"
Attention to rear valance
Both rear axle mounts fabricated with proper steel (not the ebay chocolate ones)
Underneath shot blasted then primed and undersealed
New Fuel tank and lines
The Engine:
It didn't have one to start and was a 1.1 originally
A 1.8 ex engine from a Scirocco Auto with 54k on the clock was found and this got stolen and put into place along with a Mk2 16v gearbox (new clutch and flywheel too, oh and custom fabricated rear engine mount)
All wired up and sweet as a nut 8)
It also benefitted from a complete rebuild incl all bearing seals and gaskets along with
Alternator
Radiator
Water pump
Cambelt
Starter Motor
Hoses
Pulleys
plugs leads
Distributor
Sensors
You get the idea!!!
Then the Chassis stuff:
All new suspension
Arms (polybushed all round)
Front and rear anti roll bars fitted
New brakes and lines front and rear
Rear axle stripped and powder coated
The interior needs some work to which I cant wait to get stuck into and make it something real special - currently has a Mk2 dash but I'm not so sure on this and red Mk1 interior (all is extremely clean but not to my taste so will get dealt with in due course)
I'm sure I have missed something along the line but the pics will avail all
Feel free to comment, good or bad feedback welcome. Just can't wait to get it to shows and meets

So Finally found the Mk1 I've been looking for - been hard graft doing just that too, I wanted one that some talented person not like myself had put Blood Sweat and Tears into the bodywork as in all honesty if I attempted this I reckon it would only be good for scrap
My talent (the little I do posess) lies with the engine, electrics and interior
Where do I start??? What was done to the body:
Complete bare metal strip and respray including engine bay (roman Bronze - acquired taste but one I quite fancy)
New front wings
New Front Panel
Both New Sills
New Scuttle
Both Rear Arches new and pulled out by 2"
Attention to rear valance
Both rear axle mounts fabricated with proper steel (not the ebay chocolate ones)
Underneath shot blasted then primed and undersealed
New Fuel tank and lines
The Engine:
It didn't have one to start and was a 1.1 originally
A 1.8 ex engine from a Scirocco Auto with 54k on the clock was found and this got stolen and put into place along with a Mk2 16v gearbox (new clutch and flywheel too, oh and custom fabricated rear engine mount)
All wired up and sweet as a nut 8)
It also benefitted from a complete rebuild incl all bearing seals and gaskets along with
Alternator
Radiator
Water pump
Cambelt
Starter Motor
Hoses
Pulleys
plugs leads
Distributor
Sensors
You get the idea!!!
Then the Chassis stuff:
All new suspension
Arms (polybushed all round)
Front and rear anti roll bars fitted
New brakes and lines front and rear
Rear axle stripped and powder coated
The interior needs some work to which I cant wait to get stuck into and make it something real special - currently has a Mk2 dash but I'm not so sure on this and red Mk1 interior (all is extremely clean but not to my taste so will get dealt with in due course)
I'm sure I have missed something along the line but the pics will avail all





Feel free to comment, good or bad feedback welcome. Just can't wait to get it to shows and meets

Posted
Settling In

Oh and the wheels of course - tough decision this
Fancy some banded steels but not sure what!?!
Fancy some banded steels but not sure what!?!
Posted

COTM Team

Posted
Settling In

Cheers Chris
There coming - just pulling them off the camera and will upload asap. PC is being less than co-operative
There coming - just pulling them off the camera and will upload asap. PC is being less than co-operative
Posted

Moderator

Think I saw this on eBay a while ago. Nice looking MK1 mate. 8)
Posted

Local Hero

Looks very nice, what part of Berkshire are you in?
Posted
Old Timer

banded steels no

Posted
Settling In

It was on ebay and quite honestly think I stole it off the fella - his loss my gain
James, Im in Wokingham so not far from Holyport
Ill look your FB page up at lunch
No banded steels??? Recommendations please Jon
James, Im in Wokingham so not far from Holyport
Ill look your FB page up at lunch
No banded steels??? Recommendations please Jon
Posted

Moderator



Posted

Local Hero

Linglong said
It was on ebay and quite honestly think I stole it off the fella - his loss my gain
James, Im in Wokingham so not far from Holyport
Ill look your FB page up at lunch
No banded steels??? Recommendations please Jon
The meet is tonight if you fancy popping down

Posted
Settling In

Cheers Gordon
James - Tonight I have to work till 8 and do so in Oxford so I doubt I would make it but will get sorted for the next one
Thanks for the invite chap - I'll get the next one in my diary
James - Tonight I have to work till 8 and do so in Oxford so I doubt I would make it but will get sorted for the next one
Thanks for the invite chap - I'll get the next one in my diary
Posted

Settled In

0 guests and 0 members have just viewed this: None.