205 gti rear brake proportioning valves orientation?
Posted
#1633013
(In Topic #224515)

Local Hero


Has anyone ever fitted the 3/15 rear proportioning valves off a 205 gti?
Mine have arrived today as an alternative to the unobtainable Scirocco 16v / Cabriolet ones.
One end is M12 and the other end is M10 but there is no indication of the flow direction.
Any help much appreciated
Mine have arrived today as an alternative to the unobtainable Scirocco 16v / Cabriolet ones.
One end is M12 and the other end is M10 but there is no indication of the flow direction.
Any help much appreciated

Posted

Local Hero


I registered on a 205 fourm and was told M12 to master cylinder and M10 to rear calipers if anyone is interested.
Now my next question, is it important where the valve is located. e.g. close to rear discs or directly mounted in the master cylinder?
Now my next question, is it important where the valve is located. e.g. close to rear discs or directly mounted in the master cylinder?

Posted

Newbie

205 gti rear brake proportioning valves orientation?
Howzit
rich
what location did you finally decide to put the valves and what was the final performance of the brakes?
Sent from my ONEPLUS A6003 using Tapatalk

Sent from my ONEPLUS A6003 using Tapatalk
Posted

Local Hero


Sentinel said
Howzitrich what location did you finally decide to put the valves and what was the final performance of the brakes?
Sent from my ONEPLUS A6003 using Tapatalk
Hi,
I placed them just after the master cylinder. Rear brakes don't lock up and the brakes are amazing


0 guests and 0 members have just viewed this: None.