what do you think
Posted
#660250
(In Topic #79550)
Newbie
what do you think
the short verson myself and the wife was out having a few pops with a few mates (who all own mk2's) and my wife was saying she wanted a mk1 convertable, some one poped up saying he knows someone who;s selling one for 150 pound i thought he'd just had to much to drink anyway the next day he phoned me to have a look so i thought what the hell, it had been in an smash but most of the damage had been repaired (front) the hood was in good nick the rear needed a bit of welding and the sills were in good condition. after a day to think about it i decided to get it for her, so an hour later and 90 pound it was on my drive.
like i said it does need work but i bought as a project this way i get to work on a car without the wife moaning at me.
so far ive took the dash out bumpers off, lights out just general stripping ready for welding and then spraying, oh yes and i started fabricating some wider arches so have a look and let me know what you think it is still in the fiberglass stage so its not smooth yet.
mk1 golf cab (project so any unwanted parts send them my way)
r33 nissan skyline gtst
r33 nissan skyline gtst
Posted
Local Hero
Think will look ok, as long as the wheels are right to fill the arches :wink: They're similar to the Group 2 (?) arches - these are damn expensive but was a post recently abou this as the extra track (prob wider than yours would be) puts a lot more stress on running gear.
Perhaps do a search of forum and see what you can find.
Nice one though and keep us posted :wink:
Cheers
Andy
Andy
LINCOLNSHIRE REGION - https://www.facebook.com/groups/467122313360002/
1983 MK1 Golf GTI Campaign Model - Under (looooong) resto!
1962 Rover P4 80
2002 BMW 745i
2008 BMW Z4 2.5Si
LINCOLNSHIRE REGION - https://www.facebook.com/groups/467122313360002/
1983 MK1 Golf GTI Campaign Model - Under (looooong) resto!
1962 Rover P4 80
2002 BMW 745i
2008 BMW Z4 2.5Si
Posted
Newbie
we are thinking of some deep dish wheels simular to ats cups as for the sizes prob 9j on the rears and 8j on the front all round 15's my mate is bringing a set of 14's round on sat which are 9 on the rears and 8 on the front so this will let me know if i need to change anything size wise ill get some pics when there on and post them up
mk1 golf cab (project so any unwanted parts send them my way)
r33 nissan skyline gtst
r33 nissan skyline gtst
Posted
Old Timer
Posted
Local Hero
You are going to need a seriously cool set of wheels to pull those off - probably cost you ten times the price of the car! 8O
My Build Thread
All My Build Photos - https://www.flickr.com/photos/pix-al/albums/72157622794406840
My other hobby - www.pix-al.co.uk
All My Build Photos - https://www.flickr.com/photos/pix-al/albums/72157622794406840
My other hobby - www.pix-al.co.uk
Posted
Newbie
mk1 golf cab (project so any unwanted parts send them my way)
r33 nissan skyline gtst
r33 nissan skyline gtst
Posted
Old Timer
never took it through MOT with no bumpers on though.
Mk1 Golf 16V Conversion FAQ Zip, now located at in the Forum WIKI section: http://vwgolfmk1.org.uk/index.php?page=cedi&type=misc&id=42%2F26%2F3
Posted
Local Hero
My Build Thread
All My Build Photos - https://www.flickr.com/photos/pix-al/albums/72157622794406840
My other hobby - www.pix-al.co.uk
All My Build Photos - https://www.flickr.com/photos/pix-al/albums/72157622794406840
My other hobby - www.pix-al.co.uk
Posted
Settled In
not done it with out the front as you'll need to relocate the indicators somewhere which I just couldn't be bothered to do
black 5 door mk1 GTD
mk1 scirocco Gli in bits
mk1 scirocco Gli in bits
Posted
Settling In
http://www.je-design.d…Golf_Jetta_Eins/index.php
can't find a pic of them fitted………..
9A,027,278,02A,mikuni r1 carbs,megajolt 36-1,R1 pump,lc1,02J shifter,9J ats…
0 guests and 0 members have just viewed this: None.