Exhaust for 16V Conversion
Posted
#681306
(In Topic #82239)
Settling In
Exhaust for 16V Conversion
For the 16v Conversion I know that I need to get a new manifold but will my Mongoose Stainless system connect upto the manifold and run ok?
Or will I need a new full system?
Any help appreciated
Or will I need a new full system?
Any help appreciated
Posted
Old Timer
You dont need a new exhaust, no.
But you may need a short bit to go between the two, depends what diam exhaust and maniold you go for. The Ashley manifold (and I assume the Storm as well) exit at 2.25" diam. Really you just need to get it on and see.
But you may need a short bit to go between the two, depends what diam exhaust and maniold you go for. The Ashley manifold (and I assume the Storm as well) exit at 2.25" diam. Really you just need to get it on and see.
Mk1 Golf 16V Conversion FAQ Zip, now located at in the Forum WIKI section: http://vwgolfmk1.org.uk/index.php?page=cedi&type=misc&id=42%2F26%2F3
0 guests and 0 members have just viewed this: None.