anyone

has anyone got a pic of the induction kit that gos on 1.8gti?

dont think you get them i think you just get a pannel filter :dontknow:

allen said

has anyone got a pic of the induction kit that gos on 1.8gti?

This is all I could find on the PiperCross site and I don't understand it anyway. there is a before pic but it's the same as the after pic. :dontknow:




Tian. :wink:

the pannel fillter goes under the fuel lines i dont think you get an inductiou kit as such ther are four clips thwen you slip in pannel fillter its just a expensive air fillter  

It replaces the bottom half of the air box with a sponge filter about the same size, they sometimes crop up on ebay….haven't seen one in flesh though.

it'll be a similar one to whats on xr3i's imo it seems a bit too open for my liking will draw in too much warm air and whatever crap gets blown around the engine bay.

if you want to do a cheap but effective job get a decent filter to stick in the standard air box and use some larger diameter hose to feed it and stick it behind the grill so you get good cool air

Stu

Found a picture of one:

stuGti16 said

it'll be a similar one to whats on xr3i's imo it seems a bit too open for my liking will draw in too much warm air and whatever crap gets blown around the engine bay.

if you want to do a cheap but effective job get a decent filter to stick in the standard air box and use some larger diameter hose to feed it and stick it behind the grill so you get good cool air

Stu

Not a bad idea!!

Tian

bigbobvw said

Found a picture of one:

I know you can get these for the Mk2, made for the 16v I believe, but I have never seen one for a Mk1!

I've got one on my Series 2, with a cold air feed from the grille