Imput please
Posted
#1674434
(In Topic #242761)
Newbie
Maxspeedingrods carburetor
Has anyone fitted the maXpeedingrods 4 Cylinder Carburetor 2 Barrel 38 dgs(I assume its a copy) to their golf I purchased one as I went from injection to carb I brought a new to me manifold brought new gaskets and a new base plate as the old one was too small (bells should have rang then) got it fitted turned the key and it idles a little jolty but runs drive it away on low revs it is like I have fuel blockage so I am assuits fuel mixture but need advice on how to set it up . Oh if I boot it it drives great it's just low speed pulling away and such please advise . (I have done the air leak check and its all good could the carb be too big I have a 1.8 . Thankyou ..
Posted
Local Hero
This response took about 2 minutes to post, whereas editing this line to add took about 2 seconds to post the update.
What do Divorces, Great Coffee, and Car Electrics all have in common?
They all start with GOOD Grounds.
Where are my DIY Links?
They all start with GOOD Grounds.
Where are my DIY Links?
Posted
Old Timer
Posted
Newbie
Posted
Newbie
Posted
Settled In
0 guests and 0 members have just viewed this: None.