Brake servo blanking plugs
Posted
#1594050
(In Topic #216611)
Settled In
Hi, i been told that both gsf and euro car parts sell plugs to blank off the ports on 22mm master cylinder. Ive tried them both and both say no? Would someone out there have a part number i can use.
They also say they dont sell bleed nipples either which was my second option. Id much rather use the plugs though.
Can someone help please.
Thanks
Sent from my SM-G920F using Tapatalk
They also say they dont sell bleed nipples either which was my second option. Id much rather use the plugs though.
Can someone help please.
Thanks
Sent from my SM-G920F using Tapatalk
Posted
Local Hero
You could use hex or allen bolts and some good Yellow Gas Pipe Teflon Tape, Just be sure that the bolts are barely long enough, and for good measure a washer on them that you slather both sides with Good Brand of RTV Permatex Black Ultra.
They make them,
https://www.pacificcustoms.com/ac611010plug.html
I don't know the size that you are looking for.
There are more ways to skin a canary..Just depends on how much meat you want left.
They make them,
https://www.pacificcustoms.com/ac611010plug.html
I don't know the size that you are looking for.
There are more ways to skin a canary..Just depends on how much meat you want left.
What do Divorces, Great Coffee, and Car Electrics all have in common?
They all start with GOOD Grounds.
Where are my DIY Links?
They all start with GOOD Grounds.
Where are my DIY Links?
Posted
Settled In
Re:
Im in my garage as we speak looking at a few bolt options. This has obviously been done tons of times. CheersBriano1234 said
You could use hex or allen bolts and some good Yellow Gas Pipe Teflon Tape, Just be sure that the bolts are barely long enough, and for good measure a washer on them that you slather both sides with Good Brand of RTV Permatex Black Ultra.
They make them,
https://www.pacificcustoms.com/ac611010plug.html
I don't know the size that you are looking for.
There are more ways to skin a canary..Just depends on how much meat you want left.
Sent from my SM-G920F using Tapatalk
Posted
Old Timer
they are m10x1 same as the pressure plate to crank bolts, although I would just use the proper plugs as they are tapered at the bottom. think I have some in a master cylinder somewhere
Posted
Settled In
Re:
Yes please! If you could send them i'll pay you via paypal. Much appreciated.sporttrucker said
they are m10x1 same as the pressure plate to crank bolts, although I would just use the proper plugs as they are tapered at the bottom. think I have some in a master cylinder somewhere
Dont suppose you have a reservoir for 22mm master cylinder also??
Sent from my SM-G920F using Tapatalk
Posted
Old Timer
https://www.vwheritage.com/214611225-brake-master-cylinder-blanking-plug-m10x1-vw-spare
I think these are what you're after, couldn't remember where I had seen them.
I think these are what you're after, couldn't remember where I had seen them.
Posted
Old Timer
I should have a reservoir too, will dig them out today
Posted
Settled In
Re:
Great, let me know what you want for both and i'll send you payment.sporttrucker said
I should have a reservoir too, will dig them out today
Mucho thanks
Sent from my SM-G920F using Tapatalk
Posted
Settled In
Re: Re:
Thanks to you all, cant wait to finally get proper brakes!!Theo/clipper said
Great, let me know what you want for both and i'll send you payment.sporttrucker said
I should have a reservoir too, will dig them out today
Mucho thanks
Sent from my SM-G920F using Tapatalk
Sent from my SM-G920F using Tapatalk
Posted
Old Timer
found the reservoir and 3 plugs but got to get them out of the master cylinder, how many do you need?
Posted
Settled In
Re:
I need two plugs thankssporttrucker said
found the reservoir and 3 plugs but got to get them out of the master cylinder, how many do you need?
Sent from my SM-G920F using Tapatalk
Posted
Settled In
Re: Re:
Hiya mate, how's it going with the plugs? Hope its not proving to be a painTheo/clipper said
I need two plugs thankssporttrucker said
found the reservoir and 3 plugs but got to get them out of the master cylinder, how many do you need?
Sent from my SM-G920F using Tapatalk
Sent from my SM-G920F using Tapatalk
Posted
Old Timer
got them
Posted
Settled In
Re:
Aww great, thanks.sporttrucker said
got them
How much do you want?
I can pay you through paypal so send me you email
Sent from my SM-G920F using Tapatalk
Posted
Settled In
Re: Re:
Hi, could you let me know when its been posted and when its estimated to arrive.Theo/clipper said
Aww great, thanks.sporttrucker said
got them
How much do you want?
I can pay you through paypal so send me you email
Sent from my SM-G920F using Tapatalk
Kind regards Theo
Sent from my SM-G920F using Tapatalk
Posted
Settled In
Re: Re: Re:
Hi mate, haven't heard back from you regarding the parts yet. Not sure if your aware but PayPal payment has cleared. When do think the parts will be posted?Theo/clipper said
Hi, could you let me know when its been posted and when its estimated to arrive.Theo/clipper said
Aww great, thanks.sporttrucker said
got them
How much do you want?
I can pay you through paypal so send me you email
Sent from my SM-G920F using Tapatalk
Kind regards Theo
Sent from my SM-G920F using Tapatalk
Cheers
Sent from my SM-G920F using Tapatalk
Posted
Settled In
Re: Re: Re: Re:
Items recived, many thanksTheo/clipper said
Hi mate, haven't heard back from you regarding the parts yet. Not sure if your aware but PayPal payment has cleared. When do think the parts will be posted?Theo/clipper said
Hi, could you let me know when its been posted and when its estimated to arrive.Theo/clipper said
Aww great, thanks.sporttrucker said
got them
How much do you want?
I can pay you through paypal so send me you email
Sent from my SM-G920F using Tapatalk
Kind regards Theo
Sent from my SM-G920F using Tapatalk
Cheers
Sent from my SM-G920F using Tapatalk
Sent from my SM-G920F using Tapatalk
There are too many online users to list.