Temp Guage
Posted
#703786
(In Topic #84904)
Newbie
Temp Guage
I have a 88 gti 1.8 cab and was having a problem with the led blinking occassionaly so replaced the sensor on the cylinder head.
It turned out to be the sensor on the expansion tank was causing the problem but by replacing the cylinder head sensor had created another problem as the needle now goes off the scale causing the led to blink again. it was a non genuine part so could buying a genuine part solve my problem ?.I disposed of the old sensor otherwise I would put it back on!.
Any advise would be much appreciated.
Posted
Settled In
If they can test this when cold, then you can go to the shop and ask them for the box of sensors and test each one to find a good one, i know of one guy that tested around 30 from gsf and only 6 were ok
Posted
Settled In
Trying to find a good one this morning ready for going to DubFreeze tomorrow in it.
1967 VW Beetle
1967 Walkthrough Kombi
1983 Golf Driver - FOR SALE
1967 Walkthrough Kombi
1983 Golf Driver - FOR SALE
Posted
Settling In
Posted
Settling In
Posted
Newbie
0 guests and 0 members have just viewed this: None.