Original panel van barn find. No rust, unfinished project

Hi there.

Been thinking of selling my original mk1 panel van which I started a ground up restoration on.
Car was stripped down to a shell, put on a spit frame and everything on the underside is either brand new or sand blasted/powder coated. Floor/inside sills and inside chassis legs have all been wax oiled.
New coilovers, rear disc conversion with mk4 calipers, 16v front brake set up, poly bushed, new wheel bearings, cable change gear selector, smoothed engine bay with a little bit left to finish.
It's cost me over £2000 in total as it stands which im not expecting to get back, but am open to offers around £1600.
Was previously stored in a dry barn for many years, so is very solid.
only bit of welding that needs to be finished is on the passenger side outer rear arch and a bit of finishing on a repair that i done on the o/s/r arch (a few hours work for someone thats good with a welder)

Please see pics below


















Comes with everything to put it back together apart from a gearbox

# mk1 gti engine with 73,000 miles
# panels
# glass
# lights
# mk1 wiring loom
# dash board
# rubbers
# plastic trims etc
# mk1 steering column/pedals
# carpets
# 16vservo/master cylinder
# + loads more
 
Plan was to modify and install a complete seat cordoba tdi wiring loom with CE2 fuse box to get rid of all the mk1 golf wiring gremlins :roll: , fly by wire accelerator system along with a mk4 golf pd TDI 115 bhp engine and seat cordoba TDI 5 speed gearbox. dont need to sell but currently have 3 other projects that i need to put time into.

i also have the following parts which are available separately

# mk4 golf pd tdi 115 bhp full engine conversion with loom (modified to fit CE2 fuse box) flyby wire accelerator and ecu (mapped to 150bhp)

# seat cordoba tdi 5 speed gearbox

# COMPLETE AUDI TT 225BHP BAM ENGINE, with wiring loom and ecu (can modify loom ready to use with CE2 fuse box and have the immobiliser removed from ECU)

# full seat cordoba tdi wiring loom with CE2 fuse box

for any more info, please call 07895 296 888

Car is located in Enfield north London but can deliver, will bolt all panels back on and place all other parts in the car ready for collection or delivery