Skip navigation

paintwork???

Post

Back to the top

paintwork???

hi guys,
I had some sticky selotape stuff on my bodywork and couldnt get it off with warm water and a cloth so i tried a light rud with a scourer (plastic) now ive made a dull patch on the bodywork! anybody know how i can get the shine back? cheers guys bob….

Mk1 golf gti campaign… 16v ish…

MK3 gti 16v

is the mk1 rusty? depends what you mean by rust….

Post

Back to the top
try using normal polish first, if that's no good try hand glaze polish ( or t-cut ) failing that use G3 rubbing compound but take it stage at a time or you could make it worse . should be able to buy from local car accesseries shop.

Mk1 2l TSR G60.  .getting. There twice as fast

Mk1 lhd diesel…….getting. There for half the cost

Post

Back to the top

try

hi .. try getting some car polish and t cut  mix together and try that

Post

Back to the top

Go with the t-cut

Go with the t-cut, works wonders pal, you shud see some before and after shots of my mk1, awesome stuff, but dont go gung-ho, just nice and gentle!!

Post

Back to the top
t-cut every time - that stuff is amazing - but be patient as it takes a lot of elbow grease to get the desired results - once done make sure you apply a layer of wax to the area to protect it! I've done so many cars with T-cut I've lost count and have learnt its benifits. Make sure you don't do it on hot surfaces as it is very poor and also don't do it in sunlight. Makes sure none goes onto any plastic trim either.
Let us know how it goes!
Jord

MK1 GTI Cabrio
Ford Mondeo (Daily drive)
Nissan 350z GT Coupe (the toy)
0 guests and 0 members have just viewed this: None.