Skip navigation

1.8 GTI 8V intermediate driveshaft bearing

Post

Back to the top

1.8 GTI 8V intermediate driveshaft bearing

Fully stripped down the engine for new seals etc.  On removing the intermediate driveshaft I've found that the outer/front bearing has a severe crack and deteriorated.  

Has anyone replaced one of these before?

Is it a case of popping it out and refitting another or is it an engineering job with heat treatment etc?

Cheers for any help!!!

Desperate!

'83 Mars Red GTI

Rolling project!!!

Post

Back to the top
Shouldnt be hard to replace, but as far as i know you cant buy them. someone may know different though.

Post

Back to the top
What's the aux drive shaft, is it the shaft that drives the distributor ? Any good bearing place will be able to supply the end bearing if needed.

Post

Back to the top
Yeah, it drives the dizzy and all that.  I'm going to give VW a call tomorrow but you know how helpfull and knowledgable they can be so thought I'd ask on here.

So if you can't buy them what can I do? :dontknow:

'83 Mars Red GTI

Rolling project!!!

Post

Back to the top
As far as i know,they are the same as the diesel bearings,they are hard to get hold of,i brought a set off ebay.com the american site,they have them over there  :wink:
Bert

Thats not a rod knockin,its a diesel stupid! floppy top and 1 tin top

Post

Back to the top
Nice one Bert.  I'll see if VW would like to rob me blind for one tomorrow, if that fails it looks like yet another fleabay purchase!!!

'83 Mars Red GTI

Rolling project!!!

Post

Back to the top
Look in the Yellow pages under bearing manufacturers or something like that, independents will carry stocks of virtually everything or be able to get it. I had a totally obscure bearing off a kawasaki and the place I went to matched it right up. Try someone like these guys - Acorn Industrial Services. Products & solutions for industry

Post

Back to the top
Just a quick update and to help any others that may have this problem.

Didn't have any luck with Acorn, VW or any other place in the UK.

In the end I had to order the bearing from this place in the US

WWW.Techtonicstuning.com

You have to call them as they don't do E-mail enquiries but they were really helpfull and have pretty much everything for a VW (except arch mouldings :evil: )

'83 Mars Red GTI

Rolling project!!!

Post

Back to the top
hi, i had exactly the same problem with my kr16v motor.



 searched around a bit and came accross these:





supplies by SMILES ENGINEERING in newcastle.

apparently they are the oe supplier to vw so are of decent quality!
0 guests and 0 members have just viewed this: None.