Need Pic of Engine bay a 1.5 with original 1b3 carb
Posted
#838682
(In Topic #100094)
Local Hero
Need Pic of Engine bay a 1.5 with original 1b3 carb
Pete :wink:
Posted
Settled In
Posted
Local Hero
Pete :wink:
Posted
Settled In
In there are some photos, the layout is:
Distributer goes to the connection on the front.
Brake servo line? –> T-peice —> Vac ball thing –> connection on the sticky out bit at the back of the carb that faces to the left when your looking down the car
One from the back air intake vac hose goes onto the back of the carb which faces backwards.
Sorry, couldn't get my D-SLR behind the carb to get a pic. Hope that sorts it.
Cheers
Posted
Newbie
I have a similar problem in that I'm convinced my vac lines aren't connected to the correct places and I'm not sure I'm following the description above as I can't find something that faces left!
If anyone could upload a Pic that'd be great!!
Thanks
Posted
Local Hero
What do Divorces, Great Coffee, and Car Electrics all have in common?
They all start with GOOD Grounds.
Where are my DIY Links?
They all start with GOOD Grounds.
Where are my DIY Links?
Posted
Newbie
Posted
Settled In
I think mine is mostly correct, but my car still runs rich and I've converted it to a manual choke, so some of the vacuum pull down is connected up, but redundant.
Posted
Settled In
0 guests and 0 members have just viewed this: None.