1300 to 1.816v oil sensors
Posted
#774178
(In Topic #93275)
Old Timer
1300 to 1.816v oil sensors
Now im sorting the wiring for the 16v
Did the 1300 driver engine have two oil sensors high and low - on the 16v these are above the filter - on the driver i remember that the filter screwed directly to the block face…
Can't remember if the 1300 had the same type of sensors - only placed on the block/head somewhere?
any help from you driver to valver guys would be great! 8)
Posted
Old Timer
Posted
Old Timer
Posted
Old Timer
Posted
Old Timer
spose i could wire in an additional gauge using the other one
Posted
Old Timer
anyone done a how to yet on this? have searched through all the archives and whilst there is some good information there are a lot of "i'll do a how to and put some pics up" answers but no-one actually did!
Couple of questions…
Which sender do i retain on the 16v engine and which do a i replace with the audi twin pole pressure sender?
As for oil temperature for the other guage - what sender could i use for this? Is this another audi part relevant to the vdo guages?
0 guests and 0 members have just viewed this: None.