Tie rod end nut size
Posted
#1658679
(In Topic #235486)
Settling In
I had the knuckle out to replace the wheel bearing. I smashed up the tie rod end nut when hammering off the tie rod. I can’t figure out what size the nut is so that I can get a replacement. Anyone know?
Sent from my iPhone using Tapatalk
Posted
Local Hero
Smack both sides of the spindle with a hammer at the same time, or save yourself fussing an buy a tie-rod separator.
What do Divorces, Great Coffee, and Car Electrics all have in common?
They all start with GOOD Grounds.
Where are my DIY Links?
They all start with GOOD Grounds.
Where are my DIY Links?
Posted
Local Hero
They don't last for ever and not that expensive
https://www.buycarparts.co.uk/febi-bilstein/1867553?gshp=1&gclid=Cj0KCQjw1N2TBhCOARIsAGVHQc7HiL4DPYDIqHBdP_UbN2jZQ1ArQ1-4GkWuUsYJ0OnzPH_TcG3kf_kaAtcjEALw_wcB
1988 Mk1 Golf GTi Cabriolet 1.8cc DX, K-jet. Daily drive. 317,000 miles and counting
1978 Mk1 Scirocco GLS 1.6cc FR, Webber carb. Weekend toy.
1978 Mk1 Scirocco GLS 1.6cc FR, Webber carb. Weekend toy.
Posted
Local Hero
What do Divorces, Great Coffee, and Car Electrics all have in common?
They all start with GOOD Grounds.
Where are my DIY Links?
They all start with GOOD Grounds.
Where are my DIY Links?
Posted
Settling In
Tie rod end nut size
Sent from my iPhone using Tapatalk
Posted
Local Hero
0 guests and 0 members have just viewed this: None.