Ade's Mk1 Jetta C
Posted
Moderator
Lido Green Rust Monster
On the brightside though, the car might be a few kilos lighter once you replace it all with decent metal…
Posted
Settled In
Untitled by Adrian Child, on Flickr
Untitled by Adrian Child, on Flickr
Behind the offside rear wheel…
Untitled by Adrian Child, on Flickr
I've never seen anything quite like it…
Last edit: by ade36
My Jetta Build Vlog: https://www.youtube.com/channel/UCYCWe-s41MRoF71ZbnBUQvg
Posted
Settled In
Posted
Settled In
List of past and present cars ive owned
1997 corsa 1.2 poop
2003 Ibiza 130 tdi hybrided to 240bhp
1991 Mk 2 jetta calypso green 1.6td
2001 MG ZT 190+ v6 in trophy blue…. Sold to my brother
2003 Golf GTI TDI 150 black leather heated recaros the
1997 corsa 1.2 poop
2003 Ibiza 130 tdi hybrided to 240bhp
1991 Mk 2 jetta calypso green 1.6td
2001 MG ZT 190+ v6 in trophy blue…. Sold to my brother
2003 Golf GTI TDI 150 black leather heated recaros the
Posted
Settled In
PhilipMcTDI said
I had the same problem area on the rear with mine but not as advanced fortunately, I cut a section out of another spare Jetta I had for parts and had my mate weld it in! Brillant job too
Ideally I'd like to find a rear section from a donor car as it would save a lot of faffing about fabricating bits. Quite hard to come by though
My Jetta Build Vlog: https://www.youtube.com/channel/UCYCWe-s41MRoF71ZbnBUQvg
Posted
Settled In
List of past and present cars ive owned
1997 corsa 1.2 poop
2003 Ibiza 130 tdi hybrided to 240bhp
1991 Mk 2 jetta calypso green 1.6td
2001 MG ZT 190+ v6 in trophy blue…. Sold to my brother
2003 Golf GTI TDI 150 black leather heated recaros the
1997 corsa 1.2 poop
2003 Ibiza 130 tdi hybrided to 240bhp
1991 Mk 2 jetta calypso green 1.6td
2001 MG ZT 190+ v6 in trophy blue…. Sold to my brother
2003 Golf GTI TDI 150 black leather heated recaros the
Posted
Settled In
PhilipMcTDI said
Well since I bought another donor car for parts, I might have the section your looking? Pm me your number if you like, I could what's app you the picture of the areas you need possibly tomorrow if it's not raining and cut them out if I'm done at the car
Thanks! I've sent you a PM…
My Jetta Build Vlog: https://www.youtube.com/channel/UCYCWe-s41MRoF71ZbnBUQvg
Posted
Settled In
Following much tea and deliberation I became very aware that this project is never going to get finished on my tiny drive… Thankfully, hard work at the (completely non-car-related) day job meant that a move to larger premises was on the cards. So after a year of sitting in the wind, rain and sea air, moving day came:
Loaded up…
IMG_5875 by Adrian Child, on Flickr
And now safely tucked up in the dry!
IMG_5922 by Adrian Child, on Flickr
This really has helped things no end. A full strip down can now commence and although progress will be slow at least I can plug away at it here and there when I get spare time.
Last edit: by ade36
My Jetta Build Vlog: https://www.youtube.com/channel/UCYCWe-s41MRoF71ZbnBUQvg
Posted
Settled In
I know there is little in the way of tuning options for the original GF engine but with a good service and some help with induction and exhaust it will be a nice looking and sounding lump.
My Jetta Build Vlog: https://www.youtube.com/channel/UCYCWe-s41MRoF71ZbnBUQvg
Posted
Settled In
Posted
Settling In
There is a guy on Facebook just now with a full rear end of a jetta for sale.
He also has a lot of panels, but you have to ask for a lot of images of what you need. As you have found out not everything is as nice as it looks on face value.
But good luck with the project and buy a rollover spit. was the best money I ever spent on my jetta.
Craig
Posted
Settled In
Do you mean the guy based in Bristol? If so then yeah, I've seen him on Facebook. He does seem to have quite a few parts which may be handy; however, like you say, some of them look a little rough. He's quite far from me but once the car is fully stripped it might be worth a trip over there to see what he has got. And yes, definitely want a rollover spit. Toyed with the idea of making one but i'm going to hold out for a bit and see if I can lay my hands on a reasonably priced second hand one first (if such a thing exists!).dubway said
some amount of work going to go into this.
There is a guy on Facebook just now with a full rear end of a jetta for sale.
He also has a lot of panels, but you have to ask for a lot of images of what you need. As you have found out not everything is as nice as it looks on face value.
But good luck with the project and buy a rollover spit. was the best money I ever spent on my jetta.
Craig
My Jetta Build Vlog: https://www.youtube.com/channel/UCYCWe-s41MRoF71ZbnBUQvg
Posted
Settled In
Posted
Settled In
Not much progress has been made thanks to a busy work/life schedule (and lack of funds). Just really plucking away at the boring bits here and there when I get the time.
Engine is now out, as is the interior, windscreen, most of the wiring, rear beam, all suspension etc. Each element had its issues with removing but got there in the end! And somehow, I'm still finding filler!
Been stripping bits of underseal and filler here and there when I get an hour or two… Started marking out and drilling the spot welds for the front inner wings as it's looking like the simplest route is going to be to replace these entirely. However, I have managed to source panel chops for both front corners so repairing the inner wings as two patch repairs is still an option…
Next up is fabricating some sort of jig for realigning the inner wings before they get removed/cut out.
Started keeping track of the stripdown/build on youtube; mainly as a platform to rant and moan about bits when they go badly, but also as a way of keeping my sanity with this rust heap and keeping a bit of a record of how things go back together too!
https://youtu.be/Z2TD5ZG6Spo
https://youtu.be/hQrr16trNdA
My Jetta Build Vlog: https://www.youtube.com/channel/UCYCWe-s41MRoF71ZbnBUQvg
Posted
Settled In
Not much progress has been made thanks to a busy work/life schedule (and lack of funds). Just really plucking away at the boring bits here and there when I get the time.
Engine is now out, as is the interior, windscreen, most of the wiring, rear beam, all suspension etc. Each element had its issues with removing but got there in the end! And somehow, I'm still finding filler!
Been stripping bits of underseal and filler here and there when I get an hour or two… Started marking out and drilling the spot welds for the front inner wings as it's looking like the simplest route is going to be to replace these entirely. However, I have managed to source panel chops for both front corners so repairing the inner wings as two patch repairs is still an option…
Next up is fabricating some sort of jig for realigning the inner wings before they get removed/cut out.
Started keeping track of the stripdown/build on youtube; mainly as a platform to rant and moan about bits when they go badly, but also as a way of keeping my sanity with this rust heap and keeping a bit of a record of how things go back together too!
https://youtu.be/Z2TD5ZG6Spo
https://youtu.be/hQrr16trNdA
My Jetta Build Vlog: https://www.youtube.com/channel/UCYCWe-s41MRoF71ZbnBUQvg
Posted
Settled In
I've been at mine for far too long but I'm insane when it comes to detail as I'm sure you know lol
List of past and present cars ive owned
1997 corsa 1.2 poop
2003 Ibiza 130 tdi hybrided to 240bhp
1991 Mk 2 jetta calypso green 1.6td
2001 MG ZT 190+ v6 in trophy blue…. Sold to my brother
2003 Golf GTI TDI 150 black leather heated recaros the
1997 corsa 1.2 poop
2003 Ibiza 130 tdi hybrided to 240bhp
1991 Mk 2 jetta calypso green 1.6td
2001 MG ZT 190+ v6 in trophy blue…. Sold to my brother
2003 Golf GTI TDI 150 black leather heated recaros the
Posted
Settled In
Things got drastic and scary…
Untitled by Adrian Child, on Flickr
Untitled by Adrian Child, on Flickr
Untitled by Adrian Child, on Flickr
Untitled by Adrian Child, on Flickr
Untitled by Adrian Child, on Flickr
My Jetta Build Vlog: https://www.youtube.com/channel/UCYCWe-s41MRoF71ZbnBUQvg
Posted
Settled In
Untitled by Adrian Child, on Flickr
Untitled by Adrian Child, on Flickr
Actual progress!
My Jetta Build Vlog: https://www.youtube.com/channel/UCYCWe-s41MRoF71ZbnBUQvg
Posted
Settled In
List of past and present cars ive owned
1997 corsa 1.2 poop
2003 Ibiza 130 tdi hybrided to 240bhp
1991 Mk 2 jetta calypso green 1.6td
2001 MG ZT 190+ v6 in trophy blue…. Sold to my brother
2003 Golf GTI TDI 150 black leather heated recaros the
1997 corsa 1.2 poop
2003 Ibiza 130 tdi hybrided to 240bhp
1991 Mk 2 jetta calypso green 1.6td
2001 MG ZT 190+ v6 in trophy blue…. Sold to my brother
2003 Golf GTI TDI 150 black leather heated recaros the
Posted
Settled In
Untitled by Adrian Child, on Flickr
Of course, I found some rust…
Untitled by Adrian Child, on Flickr
Untitled by Adrian Child, on Flickr
Nothing surprises me with this car now though so not that fussed by what I found.
All scrubbed up… Still got to do the spare wheel well which will be very awkward in a Jetta!
Untitled by Adrian Child, on Flickr
My Jetta Build Vlog: https://www.youtube.com/channel/UCYCWe-s41MRoF71ZbnBUQvg
0 guests and 0 members have just viewed this: None.