My 83 driver rwd project
Posted
#1371579
(In Topic #171848)
Settling In
The plans simple :) take the shell fit engine in the boot done ;)
Thought I would share my mk1 project from day 1 to what I hope will be the end product
Been after a mk1 for years but all the good ones hold there value well and the closest I ever got was a couple of mk3's vr6 2.0 8v
and on 1 occasion a audi 80 coupe 2.3 5 cylinder lol
But in 2012 after landing a dream job I had been pursuing for years hidden away in storage was a mk1 golf pretty much completely stripped out, I asked but it wasn't for sale
Then last November after nothing happening with the mk1 I asked again only to be told a week later the owner had no intention to do anything with it and I could have it if I bought him a few drinks
Here's how it stood off the road since 1997
Posted
Local Hero
Andy
LINCOLNSHIRE REGION - https://www.facebook.com/groups/467122313360002/
1983 MK1 Golf GTI Campaign Model - Under (looooong) resto!
1962 Rover P4 80
2002 BMW 745i
2008 BMW Z4 2.5Si
LINCOLNSHIRE REGION - https://www.facebook.com/groups/467122313360002/
1983 MK1 Golf GTI Campaign Model - Under (looooong) resto!
1962 Rover P4 80
2002 BMW 745i
2008 BMW Z4 2.5Si
Posted
Settling In
Posted
Settling In
Posted
Moderator
Smudger
Posted
Old Timer
have you seen the mk1 RWD that is being broken on ebay?
Posted
Settled In
Posted
Settling In
browner01 said
looks like a nice car, good luck with the project
have you seen the mk1 RWD that is being broken on ebay?
I have bud but that's a completely different way to how I'm doing mine
Cheers for the heads up though
Posted
Settling In
evileye said
nice car dude, what are your plans for the engine/drivetrain?
Cheers bud
Plans are to mid engine rwd a vr6
Posted
Moderator
Good luck with the project mate, sounds like it's going to be a corker.
Posted
Settling In
Material turned up today for the rotating spit so should have that built this weekend and hopefully mounted
Then it's zip wheel and repair time
Posted
Settling In
Posted
Old Timer
Nice looking project, shell doesn't seem too bad, seen far worse on here
I have no idea how you'll complete your project, far too complicated for my tiny brain, but best of luck with it
Matt
Posted
Settling In
pazwaa said
Hi
Nice looking project, shell doesn't seem too bad, seen far worse on here
I have no idea how you'll complete your project, far too complicated for my tiny brain, but best of luck with it
Matt
Cheers Matt
The biggest challenge I have is the bodywork and electrics the rest should be a doddle
Posted
Settling In
Posted
Moderator
Posted
Old Timer
If you can I'd drop the mounting bar down about 200mm below the rotation point. My jig is like yours, but the centre of gravity isn't it the right place, and although I can spin the shell on my own, I've had a few pant destroying moments!!
Looking at the professional ones online the mount is below the pivot point.
Matt
Posted
Settling In
I just had a quick look on eBay saw how much they was and built one
I have enough box section to modify it in morning
Cheers for the heads up Matt much appreciated
Posted
Old Timer
Posted
Moderator
0 guests and 0 members have just viewed this: None.