Nice easy one, for people who know! How to fit rear stut
Posted
#1076350
(In Topic #128820)
Settling In
Nice easy one, for people who know! How to fit rear stut
Posted
Old Timer
Posted
Settling In
Posted
Settling In
Posted
Settling In
I had an omp brace on an old mk1 and don.t remember having this problem.
……………………………………………………
Posted
Settling In
Posted
Settling In
Posted
Settling In
Posted
Old Timer
from what you are describing, it sounds like the brace replaces the top nuts and washers on the top of the struts? if so then the washer dish needs to be pointing up.
Posted
Settling In
Posted
Settling In
Posted
Settling In
Looks like because yours is five door it has different shelf supports to a 3 door?
As you can see there is loads of room on mine.
……………………………………………………
Posted
Old Timer
Posted
Local Hero
Posted
Settling In
Posted
Settling In
Does it not just unbolt from below? Never seen a 5 door one but surely its not metal and welded is it?
……………………………………………………
Posted
Settled In
Mk1'83 G60
Mk1'82 2.0L 8v
Mk1'93 GTI Sportline
Mk1'82 2.0L 8v
Mk1'93 GTI Sportline
Posted
Local Hero
Not going to be a simple bolt in job. Some modification might be required… There is an easy 15mm you can cut off the top of that brace.
My Build Thread
All My Build Photos - https://www.flickr.com/photos/pix-al/albums/72157622794406840
My other hobby - www.pix-al.co.uk
All My Build Photos - https://www.flickr.com/photos/pix-al/albums/72157622794406840
My other hobby - www.pix-al.co.uk
Posted
Settling In
Posted
Local Hero
0 guests and 0 members have just viewed this: None.