Driver, to 16 valver, 2017 rebuild!
Posted
Old Timer
Haven't updated for a while, work's been slow, but now ive finished college, im cracking on again.
Prepping and spraying the bay at the mo, some pics of the progress so far..
Bay after taking 1.3 lump out, ready for cleaning and prepping
Fillered the clutch repair
Took all sound proofing out of rain tray area, found some rust here, and a small hole going into the inside of the car :roll: , sorted that, por 15'd it, removed wiper bracket as im using mk2 motor, which doesn't bolt to this.
The front arch was a bit wonky, so sorted that with a skim of filler
Sorted battery tray, back to metal then por 15 it, worked well, por 15 gives a nice smooth finish considering its brushed on. Excuse the dust all over it.
Found a far bit of rot in this area on both sides, where water was getting trapped under the old seam sealer, , for the time being i just cleaned it up best as and por 15, and new seam sealer.
More seam sealing, and por 15
Then rubbed back old paint to key it and sorted any rough areas, and degreased it. Then masked it all up, this took forever lol!
Tomorrow i will finish priming, get some stone chip on, and get ready to mars red it. I just cant wait to drive it!
Cheers for looking.
Pete
Prepping and spraying the bay at the mo, some pics of the progress so far..
Bay after taking 1.3 lump out, ready for cleaning and prepping
Fillered the clutch repair
Took all sound proofing out of rain tray area, found some rust here, and a small hole going into the inside of the car :roll: , sorted that, por 15'd it, removed wiper bracket as im using mk2 motor, which doesn't bolt to this.
The front arch was a bit wonky, so sorted that with a skim of filler
Sorted battery tray, back to metal then por 15 it, worked well, por 15 gives a nice smooth finish considering its brushed on. Excuse the dust all over it.
Found a far bit of rot in this area on both sides, where water was getting trapped under the old seam sealer, , for the time being i just cleaned it up best as and por 15, and new seam sealer.
More seam sealing, and por 15
Then rubbed back old paint to key it and sorted any rough areas, and degreased it. Then masked it all up, this took forever lol!
Tomorrow i will finish priming, get some stone chip on, and get ready to mars red it. I just cant wait to drive it!
Cheers for looking.
Pete
Posted
Local Hero
looking good so far
Posted
Old Timer
good work matey
i like to see projects like this.
i like to see projects like this.
83 MK1 GTI G60 85 MK2 GTI 20VT 2004 SEAT ALTEA 2.0 TDI SPORT
Posted
Settled In
Very good to see you back on with it dude!!
looking forward to the end result myself.
keep up the good work fella!
looking forward to the end result myself.
keep up the good work fella!
Posted
Old Timer
Been busy this weekend, sum more progress, on to the pics
Bay in primer
Stonechip on lower sections
Fresh LA3A mars red B)
Set up gun and compressor
Mid way through spraying
Finished for the day, got a few runs to sort out and give it another coat or 2, but not bad for a first attempt i think.
Gonna get some top coat to lacquer it, and then on to rebuilding the engine
Cheers for looking
Pete
Bay in primer
Stonechip on lower sections
Fresh LA3A mars red B)
Set up gun and compressor
Mid way through spraying
Finished for the day, got a few runs to sort out and give it another coat or 2, but not bad for a first attempt i think.
Gonna get some top coat to lacquer it, and then on to rebuilding the engine
Cheers for looking
Pete
Posted
Settling In
looks gud wise mine is that far
Posted
Old Timer
8) good work mate looks really good
83 MK1 GTI G60 85 MK2 GTI 20VT 2004 SEAT ALTEA 2.0 TDI SPORT
Posted
Old Timer
Cheers people for the comments, will be sorting a few more coats of paint this week, then on to the engine rebuild, will keep you up to date with pics.
I need a gti N/S drive shaft, and the lower half of a gti airbox, if anyone can help?
Cheers
Pete
I need a gti N/S drive shaft, and the lower half of a gti airbox, if anyone can help?
Cheers
Pete
Posted
Old Timer
Impressive!!!
I think i have a set of 16v drive shafts. I'll have a look for you.
I think i have a set of 16v drive shafts. I'll have a look for you.
Posted
Old Timer
A bit more progress so far, though it seems to be taking forever
Finished painting arch, and lacquered it and the bay.
Then got the paint stripper out to clean up the previous owners painting skills :blink:
And cleaned the years of gunk off the gearbox.
Next up is a bit more cleaning, paint stripping, and then onto spraying g'box, inlet, rocker, block etc.
Also still need a gti n/s drive shaft.
And im having problems identifying the gearbox code 6S251185, (020 box) think the bell housing may be different to the gearbox itself, as it was replaced/overhauled a some stage, the input shaft is 24mm, so should be a 16v box?
Cheers for looking
Pete
Finished painting arch, and lacquered it and the bay.
Then got the paint stripper out to clean up the previous owners painting skills :blink:
And cleaned the years of gunk off the gearbox.
Next up is a bit more cleaning, paint stripping, and then onto spraying g'box, inlet, rocker, block etc.
Also still need a gti n/s drive shaft.
And im having problems identifying the gearbox code 6S251185, (020 box) think the bell housing may be different to the gearbox itself, as it was replaced/overhauled a some stage, the input shaft is 24mm, so should be a 16v box?
Cheers for looking
Pete
Posted
Old Timer
feeling the work that has went into this,i smoothed the bay on my mk1 jetta myself and im currently just about completed a valver swap in my golf driver so can well appreciate the hours your putting in. top job bud 8) 8) 8) 8) 8)
Posted
Settled In
Coming on well Pete ,you have done a good job of cleaning up the cam cover and inlet manifold .
I have sent you a PM
I have sent you a PM
76 ?
78 gls
83 gti 5v
78 gls
83 gti 5v
Posted
Settled In
mk`1 1.8 16v
good work on the car m8y any chance you could tell me the wiring your using as i am doing the same 1.1C to 1.8 16v and am stuck at this point cheers keep up the good work
<a href="http://s277.photobucket.com/albums/kk54/tamthebam16v/?action=view¤t=05092008653-1.jpg"><img src="http://i277.photobucket.com/albums/kk54/tamthebam16v/05092008653-1.jpg" border="0" alt="Photobucket"></a>
Posted
Settled In
Nice work there dude!
Posted
Old Timer
Re: mk`1 1.8 16v
Cheers for the comments people, will have a update soon.
I broke a 16v mk2 for the engine, box, loom etc (it was pre 90' spec so plugs into the later mk1 fusebox), will be using the engine loom, and the isv loom. I will know more when i get onto the wiring itself. Sorry cant be of more help.
Pete
tamthebam16v said
good work on the car m8y any chance you could tell me the wiring your using as i am doing the same 1.1C to 1.8 16v and am stuck at this point cheers keep up the good work
I broke a 16v mk2 for the engine, box, loom etc (it was pre 90' spec so plugs into the later mk1 fusebox), will be using the engine loom, and the isv loom. I will know more when i get onto the wiring itself. Sorry cant be of more help.
Pete
Posted
Old Timer
sorry pete for the hijack,tam the bam valverman,try vwvortex.com->volkswagen section-> mk1 section -> mk1 FAQ section
theyve got a fair squad of q's about the mk1 16v conv. and lots of pic enhanced threads with writ up plug defined diagrams couple of good threads with good pictures with nominated plugs/connectors in case your mixing looms 8)
pete i take it your extending the m2 loom over to reach the mk1 fuse box?
theyve got a fair squad of q's about the mk1 16v conv. and lots of pic enhanced threads with writ up plug defined diagrams couple of good threads with good pictures with nominated plugs/connectors in case your mixing looms 8)
pete i take it your extending the m2 loom over to reach the mk1 fuse box?
Posted
Old Timer
nice work
love reading topics like this
love reading topics like this
mk1 golf gti in porsche ocen blue and polished porsche 7slots
Posted
Old Timer
golf_coupe said
pete i take it your extending the m2 loom over to reach the mk1 fuse box?
Will i have to? I get the feeling i may have to shorten it a bit as the mk2 fuse box is further from most connectors, though i maybe wrong, will have a closer look when am at that stage.
Cheers justin gti, will have some more progress pic soon.
Pete
Posted
Old Timer
the mk2 fuse box sits under/around the steering column so you either tuck it away or move it over to the pass. side alla mk1. I utilised a full jetta mk2 loom in my mk1 jetta(had no wires at all http://www.wheel-whores.com/forum/viewtopic.php?t=4194)and tbh the drivers side region in a mk1 dashboard is a bit busy so we were looking at me sitting with a roll of wire and a solder gun. I hate wiring and i feel that on a scale of one to ten its a devils HND in scrotum topography.
Posted
Old Timer
I will look into it, and yea wiring can be a pain!
0 guests and 0 members have just viewed this: None.