Mellow Yellow 3.2ltr 24v Conversion
Posted
Old Timer
The Yellow Peril R32
Today got the box degreased, then brass wire wheel on the drill, alloy wheel cleaner to remove the final oxide and panel wipe.
Gave it 2 coats of acid etch primer
Gave it 2 coats of acid etch primer
Last edit: by Rich.
Posted
Moderator
Posted
Old Timer
Gearbox looks great just in the primer
What final colour you going for?
Matt
What final colour you going for?
Matt
Posted
Old Timer
Re:
Hi Ian,borednow said
You're a brave man, diving that deeply into a gear box. Nice work.
looks like it's all coming along nicely.
Have you got a link to the alternator and pulley you used by any chance?
Ian
The alternator is a big gamble. I've spoken to rubjonny about it and we recon that a signal can be taken for the revs with another toy i have to convert from 4pot to 6 pot cycle.
The pulley goes with the earlier 24v bracket that the alternator sits in. Again this was a hunch as I've seen other 24v mk1 owners use this rather than the later bracket which puts the alternator lower down the engine which i believe can cause issues with the front panel.
I'm planning to trial fit this Friday and will let you know how i get on. If the engine fits i will give you the numbers as don't want to lead you down the wrong path. Unfortunately I'm making it up as i go along ha ha. Looks alright though
Last edit: by Rich.
Posted
Old Timer
Re:
Cheers Matt, nothing original I'm afraid. Boring high temperature aluminium colour.pazwaa said
Gearbox looks great just in the primer
What final colour you going for?
Matt
Sent from my Nexus 4 using Tapatalk
Posted
Old Timer
The Yellow Peril R32
Got some top coat on, vht aluminium paint. Had a bit of a problem where the base it was on was pretty much the same colour
First coat on but will put another on for good measures
Sent from my Nexus 4 using Tapatalk
First coat on but will put another on for good measures
Sent from my Nexus 4 using Tapatalk
Posted
Old Timer
The Yellow Peril R32
Got some top coat on, vht aluminium paint. Had a bit of a problem where the base it was on was pretty much the same colour
First coat on but will put another on for good measures
First coat on but will put another on for good measures
Posted
Old Timer
Got a spare 5th gear case I'm going to spray black as per the original box
Sent from my Nexus 4 using Tapatalk
Sent from my Nexus 4 using Tapatalk
Posted
Old Timer
The Yellow Peril R32
Finished off the timing chain today and got the valve cover on. I've been waiting for a single stretch bolt from VW which really needed replacing.
Sent from my Nexus 4 using Tapatalk
Sent from my Nexus 4 using Tapatalk
Posted
Old Timer
The Yellow Peril R32
Flywheel, clutch and gear box on
Sent from my Nexus 4 using Tapatalk
Sent from my Nexus 4 using Tapatalk
Posted
Old Timer
The Yellow Peril R32
The last few nights i have been prepping the block for paint. Still have some work to do but it's not too bad.
Sent from my Nexus 4 using Tapatalk
Sent from my Nexus 4 using Tapatalk
Posted
Old Timer
Need to finish the gearbox and output flanges then start mounting everything back on again
Sent from my Nexus 4 using Tapatalk
Sent from my Nexus 4 using Tapatalk
Posted
Local Hero
That'll look nice all painted up.
I like the finish on the cover
I like the finish on the cover
Andy
LINCOLNSHIRE REGION - https://www.facebook.com/groups/467122313360002/
1983 MK1 Golf GTI Campaign Model - Under (looooong) resto!
1962 Rover P4 80
2002 BMW 745i
2008 BMW Z4 2.5Si
LINCOLNSHIRE REGION - https://www.facebook.com/groups/467122313360002/
1983 MK1 Golf GTI Campaign Model - Under (looooong) resto!
1962 Rover P4 80
2002 BMW 745i
2008 BMW Z4 2.5Si
Posted
Old Timer
Re:
Hairyarse said
That'll look nice all painted up.
I like the finish on the cover
Cheers Andy it's wrinkle black with silver vein. It's a shame most of it will be covered.
Sent from my Nexus 4 using Tapatalk
Posted
Old Timer
The Yellow Peril R32
Got the car ready for the big sand down tomorrow. Started on one arch today and no surprises
Posted
Old Timer
The Yellow Peril R32
Not quite there so much sanding!
Sent from my Nexus 4 using Tapatalk
Sent from my Nexus 4 using Tapatalk
Posted
Old Timer
The Yellow Peril R32
The wire knotted wheel on my angle grinder decided to make friends :O, glad i wasn't wearing shorts!
Sent from my Nexus 4 using Tapatalk
Sent from my Nexus 4 using Tapatalk
Posted
Old Timer
Well no one commented on my last post, maybe the hairy leg put people off lol
Any ways got some paint on the old block today. I put some POR15 metal ready on to etch the surface then brushed on high temperature enamel.
Any ways got some paint on the old block today. I put some POR15 metal ready on to etch the surface then brushed on high temperature enamel.
Last edit: by Rich.
Posted
Local Hero
Ouch, that looked painful!!
I bet you're glad when all the sanding and grinding is done!!
I bet you're glad when all the sanding and grinding is done!!
Andy
LINCOLNSHIRE REGION - https://www.facebook.com/groups/467122313360002/
1983 MK1 Golf GTI Campaign Model - Under (looooong) resto!
1962 Rover P4 80
2002 BMW 745i
2008 BMW Z4 2.5Si
LINCOLNSHIRE REGION - https://www.facebook.com/groups/467122313360002/
1983 MK1 Golf GTI Campaign Model - Under (looooong) resto!
1962 Rover P4 80
2002 BMW 745i
2008 BMW Z4 2.5Si
Posted
Old Timer
Hairyarse said
Ouch, that looked painful!!
I bet you're glad when all the sanding and grinding is done!!
Stung a bit, no pain no gain
I did one side holding on for dear life and then did the other and got complacent
She's getting there now. hoping to get some paint on in the next week
There are too many online users to list.