02j gearbox tower
Posted
Settled In
Will try it, thanks. Took the bolts out but couldn't get the cap off, seemed pretty stuck
'82 c formel e - 1.8t 20v
Posted
Moderator
Will lever out with a pair of screwdrivers. Just go easy...
Ever growing range of new mk1 golf parts www.classic-vw.co.uk
Posted
Settled In
funk-star said
Will lever out with a pair of screwdrivers. Just go easy…
Got the cap off and the shaft fits in fine but even with the bottom cap removed the tower won't go in. Its just that last little bit, will a little wack with a mallet sit her in?
'82 c formel e - 1.8t 20v
Posted
Moderator
Make sure both faces are clean, should pop in if you have it all lined up right.
Have you tried jiggling the bits to get the gears right?
Have you tried jiggling the bits to get the gears right?
Ever growing range of new mk1 golf parts www.classic-vw.co.uk
Posted
Settled In
Done a bit of jiggling and she went in!
Cheers funk-star
Cheers funk-star
'82 c formel e - 1.8t 20v
Posted
Moderator
Posted
Settled In
All in and working so have reverse back
I quite like it without a gaiter, looks racey
I quite like it without a gaiter, looks racey
'82 c formel e - 1.8t 20v
Posted
Moderator
Cool.
Fits surprisingly well!
Is it mounted from under the car?
Fits surprisingly well!
Is it mounted from under the car?
Ever growing range of new mk1 golf parts www.classic-vw.co.uk
Posted
Settled In
Inside! The old 02a shifter was mounted underneath and it was so thick that the exhaust was really low, so now there is a lot more room underneath. It's brought it higher so it makes it easier to change gear as before I had to really reach for 1st gear
'82 c formel e - 1.8t 20v
Posted
Moderator
Fits well!
Just get a caddy surround for it and you'd never know
Just get a caddy surround for it and you'd never know
Ever growing range of new mk1 golf parts www.classic-vw.co.uk
Posted
Settled In
I have one but it doesn't quite sit properly, going to do a bit of chopping of the plastic on it and that should do the trick!
'82 c formel e - 1.8t 20v
0 guests and 0 members have just viewed this: None.