Black '82 GTI. Resurrection.
Posted
Settled In
Black '82 GTI. Resurrection.
god skills mate keep up the good work :wink:
Posted
Settled In
supersport2 said
Nice seeing someone with the same problems as mine!! Looking good, any updates?
Yeah they're common rot spots
I've noticed that even in the garage, which is relatively dry, there is a build up of condensation just above the plate connected to the rear panel.So this area is almost always wet :dontknow:
Anyway, no updates, after reading my previous post which states that motivation is high, I wonder what has gone wrong
After this was written, I spent a lot of time cleaning off all the surface rust under the back end, then treating it with kurust, then giving it a coat of rust converting primer. Didn't update the thread 'cos this was all a bit boring. So, I must have exhausted the motivation doing that, as haven't touched it since Before Christmas :redfaced:
All I have done is bolt the beam back on so I can put the car in to storage for a while, so the my Escort can come out for a bit
Posted
Settled In
Gazvenn said
Maine awesome fabrication work here gotta say I'm jealous of your skills
Thanks Gazvenn, I don't think I'm doing anything special, If you can shape a bit of cardboard then you can do the same with a piece of metal
If you're going to the classic car show at Tatton Park on Sunday (19th), keep an eye out for the old heap below, and come say hello.
Posted
Settled In
The Mexico looks smart! I sold my old supersport fiesta to try something different!!
Posted
Settled In
Well, after a short break (2 years is quite short……. isn't it?) I've started back on my Golf.
Here's today's work
This is a seam which runs across the car in front of the fuel tank.
chopped it out and started putting in new metal
here's the inside.
Floor pan edge repaired.
ground back and a lick of paint just to protect it.
There you go, now time for another short break
Here's today's work
This is a seam which runs across the car in front of the fuel tank.
chopped it out and started putting in new metal
here's the inside.
Floor pan edge repaired.
ground back and a lick of paint just to protect it.
There you go, now time for another short break
Posted
Moderator
Short break you say
Welcome back to MK1 restoration.
Welcome back to MK1 restoration.
Posted
Settled In
smudger said
Short break you say
Welcome back to MK1 restoration.
Thanks smudger, I only stopped physically restoring it, mentally, I'm doing it all the time
Posted
Settled In
Posted
Moderator
Fabulous mate. Retro-tastic
Posted
Old Timer
2 years is a nice, short break!
Glad your back on with it
Matt
Glad your back on with it
Matt
Posted
Settled In
How much time should you dedicate to one component of the car? Cos' I've spent the best part of a day reviving my fuel pump cradle. Didn't want to get a used one just to find it's the same as the one I've already got, didn't want to spend over 50 quid on a new one, so time was what I spent 😃
The edges had gone all frilly, and the rust had eaten through where the 2 brackets are welded on.
Cut the brackets off and replaced the bits where they were supposed to be welded on. Then replaced the sides and rewelded the brackets back on. Drilled holes where they were before and painted.
So now we have a new ornament in the living room, too good to leave outside in a damp garage.
It's a bit scruffy on the inside though
😉
The edges had gone all frilly, and the rust had eaten through where the 2 brackets are welded on.
Cut the brackets off and replaced the bits where they were supposed to be welded on. Then replaced the sides and rewelded the brackets back on. Drilled holes where they were before and painted.
So now we have a new ornament in the living room, too good to leave outside in a damp garage.
It's a bit scruffy on the inside though
😉
Posted
Moderator
Won't matter though mate once the foam is in place.
Posted
Settled In
I'm glad your back on it.. You have some great skills..
Best of luck with your resto..
Best of luck with your resto..
Posted
Settled In
Is my car related to this one?
Tested by Autocar late in '82. It's one of the first 1800's. But what's got me thinking is the NV area code in both my reg. no. And the car above, presumably supplied by Volkswagen UK for testing. Looking at other VW and Audi road tests of the time, they all have the NV or other Northamptonshire reg. area codes.
I am now going to send off a V888 form to DVLA to find out the previous keepers.
Does any one have an ex. VW press car, or have any info about them?
Tested by Autocar late in '82. It's one of the first 1800's. But what's got me thinking is the NV area code in both my reg. no. And the car above, presumably supplied by Volkswagen UK for testing. Looking at other VW and Audi road tests of the time, they all have the NV or other Northamptonshire reg. area codes.
I am now going to send off a V888 form to DVLA to find out the previous keepers.
Does any one have an ex. VW press car, or have any info about them?
Posted
Local Hero
I thought NV was Milton Keynes? It's where VW UK HQ is so would make sense.
Nice old pic
Nice old pic
Andy
LINCOLNSHIRE REGION - https://www.facebook.com/groups/467122313360002/
1983 MK1 Golf GTI Campaign Model - Under (looooong) resto!
1962 Rover P4 80
2002 BMW 745i
2008 BMW Z4 2.5Si
LINCOLNSHIRE REGION - https://www.facebook.com/groups/467122313360002/
1983 MK1 Golf GTI Campaign Model - Under (looooong) resto!
1962 Rover P4 80
2002 BMW 745i
2008 BMW Z4 2.5Si
Posted
Settled In
On the list I have, it's Northampton. On the map it doesn't look far away from Milton Keynes though
Posted
Local Hero
Oh fair dos. Yes they're very close to each other, only a junction of the M1
Andy
LINCOLNSHIRE REGION - https://www.facebook.com/groups/467122313360002/
1983 MK1 Golf GTI Campaign Model - Under (looooong) resto!
1962 Rover P4 80
2002 BMW 745i
2008 BMW Z4 2.5Si
LINCOLNSHIRE REGION - https://www.facebook.com/groups/467122313360002/
1983 MK1 Golf GTI Campaign Model - Under (looooong) resto!
1962 Rover P4 80
2002 BMW 745i
2008 BMW Z4 2.5Si
Posted
Old Timer
Gradually getting there
"Mk1 Golf Gti...all things to all men"
Posted
Settled In
Shiny
Posted
Moderator
There are too many online users to list.