tin top rolling project
Posted
Old Timer
tin top rolling project
WELL… the volksfest weekend was a minter iv been informed by a friend iv never met on facebook that theres loads of vw shows all the time so im gonna be goin as much as i can, to EVERYTHING
problem was, when i was there all the cars looked stunning and mine looked a little tired to say the least
so took this week off work to work on thew body
i have had part of my back panel cut out and part filled but due to work iv not been able to finish it till this week so yeah. heres the rust panel taken on the volksfest:
(thanks to gammy)
and after a bit of sanding and a little filler:
sorry about the bad lighting it was taken on the phone
then we tackled two small dents in the quarter panel, it was tiny but took ages
so now thats done im a little happier
knocked back the filler on the back panel but were about half way through it, worth the pic tho
tomorrow i should be knocking that 1k primer back and leveling it 100% then a sealer coat and get the whole panel in primer
FINALLY starting body work it feels GOOOOD!!
oh and the little plastic spats are gone surprisingly there was not a speck of rust under them bargain
i got a funny feeling this post will become very active over the next few days
ill keep ya all posted!
problem was, when i was there all the cars looked stunning and mine looked a little tired to say the least
so took this week off work to work on thew body
i have had part of my back panel cut out and part filled but due to work iv not been able to finish it till this week so yeah. heres the rust panel taken on the volksfest:
(thanks to gammy)
and after a bit of sanding and a little filler:
sorry about the bad lighting it was taken on the phone
then we tackled two small dents in the quarter panel, it was tiny but took ages
so now thats done im a little happier
knocked back the filler on the back panel but were about half way through it, worth the pic tho
tomorrow i should be knocking that 1k primer back and leveling it 100% then a sealer coat and get the whole panel in primer
FINALLY starting body work it feels GOOOOD!!
oh and the little plastic spats are gone surprisingly there was not a speck of rust under them bargain
i got a funny feeling this post will become very active over the next few days
ill keep ya all posted!
booze and boredom, the greatest mix
Posted
Old Timer
DAY TWO:
so we carried on today and the rear quarter is in primer and im actually loving the colour.
so popped the window out and keyed up all the area needed
then masked it all up and got out the barcoat what a life saver when spraying
and on with the green TI high build primer
(again, another life saver)
got out the 800 grit wet an dry, smoothed it off and washed it and now its looking all shiny for primer
and now wid the window in this is how im driving it lol
WOO its good for a base coat of primer, were going to do one panel at a time until we go round the car, then take a week out, strip it and go over again to finish it all off in one go
see what happens when you go to a vw show… i think itll be in primer for when the agm comes around as iv only got till thursday then i can only do it two days a week again oh and the odd saturday.
i think were doing ok considering the whole respray is costing around about £60.00!
more tomorrow i think im gonna be tackling the drivers door and my cousins doing the left side of the back panel.
were on a roll!!!
so we carried on today and the rear quarter is in primer and im actually loving the colour.
so popped the window out and keyed up all the area needed
then masked it all up and got out the barcoat what a life saver when spraying
and on with the green TI high build primer
(again, another life saver)
got out the 800 grit wet an dry, smoothed it off and washed it and now its looking all shiny for primer
and now wid the window in this is how im driving it lol
WOO its good for a base coat of primer, were going to do one panel at a time until we go round the car, then take a week out, strip it and go over again to finish it all off in one go
see what happens when you go to a vw show… i think itll be in primer for when the agm comes around as iv only got till thursday then i can only do it two days a week again oh and the odd saturday.
i think were doing ok considering the whole respray is costing around about £60.00!
more tomorrow i think im gonna be tackling the drivers door and my cousins doing the left side of the back panel.
were on a roll!!!
booze and boredom, the greatest mix
Posted
Social Media Manager
Posted
Old Timer
na its going a pastel colour, i was thinking something like a light blue but its too common, i actually REALLY like the yellow the primers in so i might just flatten that down and lacquer it
itll never be a show and shine car but one day ill be kitting it out more track style and one day when i eventually get a pay rise ill be getting another one and restoring that one
itll never be a show and shine car but one day ill be kitting it out more track style and one day when i eventually get a pay rise ill be getting another one and restoring that one
booze and boredom, the greatest mix
Posted
Old Timer
DAY THREE:
woo stayed a little later today and would of got most of it in primer if i didnt run outa thinners and hardener
i knew we didnt have alot and i was planning on buying more tomorrow anyway
right ill let the piccys speak for themselves
got the other rust cut out and panels made
made a start on the drivers door
getting the pigeon poop gone
got it all filled
door ready
coating the door in barcoat… who knows what this car was sprayed over with before but im not chancing it
and green TI primer (had a few runs… may be DeVilbiss guns but dirty nossles
back panel all primered up
and onto the GIANT dent in the front wing… (ill change it one day,honest )
pass side rear quarter ready for paint tomorrow all dents gone an smooth
and with the front wing in barcoat this is how i drove it home tonight
and other side
ahh feels good do be actually doing it
were looking into two colours now…who knows what colour its gonna be… all we know is were not good enough at prep to have anything other than flat satin haha..
more tomorrow peeps
woo stayed a little later today and would of got most of it in primer if i didnt run outa thinners and hardener
i knew we didnt have alot and i was planning on buying more tomorrow anyway
right ill let the piccys speak for themselves
got the other rust cut out and panels made
made a start on the drivers door
getting the pigeon poop gone
got it all filled
door ready
coating the door in barcoat… who knows what this car was sprayed over with before but im not chancing it
and green TI primer (had a few runs… may be DeVilbiss guns but dirty nossles
back panel all primered up
and onto the GIANT dent in the front wing… (ill change it one day,honest )
pass side rear quarter ready for paint tomorrow all dents gone an smooth
and with the front wing in barcoat this is how i drove it home tonight
and other side
ahh feels good do be actually doing it
were looking into two colours now…who knows what colour its gonna be… all we know is were not good enough at prep to have anything other than flat satin haha..
more tomorrow peeps
booze and boredom, the greatest mix
Posted
Settling In
looking good mate looking good
mk4 golf gti with bora front end and lots more ,
mk1 gti project
mk1 gti project
Posted
Old Timer
thanks dude
DAY FOUR:
right… this was the final day this week… back to two days a week after this including work but i think were pushing to get it done now so shouldn't be too long
got my thinners and hardener and even i sprayed which was nice
heres the snaps
started working on the other wing. thought it was in good condition
then this fell out…
so my cousin got it off beated it out and filled what was left
sorry not alot of photos of this as i was in a hurry to get my rear quarter all barcoated and primed
once done i stripped the pass door and rubbed it down, barcoated it and barcoated the whole front end ready for my cousin to spray it all with the legendary green ti primer
another photo of the front while in barcoat
and the front while the primer was drying (the streaks will flatten out)
and how it looked once dry and in the sunshine all dusty
and after a good wash i took it home and parked it up.
thought i would take a photo as it kinda blends in with the house
sooooo WOO almost everything in primer
gotta do the door shuts, boot and roof. then all in primer but the engine bay.
i have a 1.8 engine i will be picking up soon so when that comes and the 1.1 gets pulled out i will be smoothing, sanding and spraying the bay… will be a while yet tho
grrr… gotta do all the inside yet too i think ill and paint the 2k paint inside and spend hours rubbing it down…
still gotta pick the colours….
more next week
DAY FOUR:
right… this was the final day this week… back to two days a week after this including work but i think were pushing to get it done now so shouldn't be too long
got my thinners and hardener and even i sprayed which was nice
heres the snaps
started working on the other wing. thought it was in good condition
then this fell out…
so my cousin got it off beated it out and filled what was left
sorry not alot of photos of this as i was in a hurry to get my rear quarter all barcoated and primed
once done i stripped the pass door and rubbed it down, barcoated it and barcoated the whole front end ready for my cousin to spray it all with the legendary green ti primer
another photo of the front while in barcoat
and the front while the primer was drying (the streaks will flatten out)
and how it looked once dry and in the sunshine all dusty
and after a good wash i took it home and parked it up.
thought i would take a photo as it kinda blends in with the house
sooooo WOO almost everything in primer
gotta do the door shuts, boot and roof. then all in primer but the engine bay.
i have a 1.8 engine i will be picking up soon so when that comes and the 1.1 gets pulled out i will be smoothing, sanding and spraying the bay… will be a while yet tho
grrr… gotta do all the inside yet too i think ill and paint the 2k paint inside and spend hours rubbing it down…
still gotta pick the colours….
more next week
booze and boredom, the greatest mix
Posted
Old Timer
oh and the pass door gotta be done again
NEVER SPRAY ANYTHING IN HALFORDS SPRAY CANS IF ITS GONNA BE REDONE!!!!!!!!!
that crap will react no matter what you do… i gotta strip the whole door AGAIN what a load of crap
even the plasticoat stuff from B n Q was ok on the bonnet but NEVER using halfords spray again
NEVER SPRAY ANYTHING IN HALFORDS SPRAY CANS IF ITS GONNA BE REDONE!!!!!!!!!
that crap will react no matter what you do… i gotta strip the whole door AGAIN what a load of crap
even the plasticoat stuff from B n Q was ok on the bonnet but NEVER using halfords spray again
booze and boredom, the greatest mix
Posted
Settling In
looks awesome mate, shame i didn't see it in the original state
let me know if you want some chrome mirrors, i don't think they fit mine, the screws are too close. bugger!
let me know if you want some chrome mirrors, i don't think they fit mine, the screws are too close. bugger!
low, and slow.
Posted
Settling In
looks awesome mate, shame i didn't see it in the original state
let me know if you want some chrome mirrors, i don't think they fit mine, the screws are too close. bugger!
let me know if you want some chrome mirrors, i don't think they fit mine, the screws are too close. bugger!
low, and slow.
Posted
Old Timer
yeah man ill have em im gonna be going for the chrome look
just gotta get the chrome strips too
just gotta get the chrome strips too
booze and boredom, the greatest mix
Posted
Twitter Manager
I that where you work mate? I work just up the feeder by partco.
Posted
Old Timer
lol i work in a company called PDQ.. were a courier company were next door to motion sk8 prk im only there on Wednesdays and most Fridays my cousin co runs the business and i help out when theres stuff to do and the rest of the time i use all the tools him and the boss has collected over the years lol your welcome to come down one day when im there
booze and boredom, the greatest mix
Posted
Settled In
Well done mate. Looking good. It's going to look amazing when finished - You'll be putting all of us to shame next year at Volksfest!
Posted
Old Timer
haha i wish bud its looking ok for a home prepped and sprayed and all for less than 100 bucks
booze and boredom, the greatest mix
Posted
Old Timer
just a quick post.
i hurt my back the monday after working on the car so iv taken a week or so off and im just driving it
i did take off all the tins in the engine bay and sprayed them, along with a few other bits to neaten it up in there.
ill get some pics later, just popping up asda to buy a new xd card as turns out my card was nicked and the 2gb one i bought isnt supported by the cam… GAY!
anyway..
but the main reason for this post was to get peoples opinions on colour choice
i photoshopped this to see what the colours i was going for would look like and i REALLY like it. what do ya all think:
it was from this photo that i made it from, and as you can see its slightly lowered too im new at doin stuff like that on Photoshop but i thought it turned out well
so…. what ya all think about the new colour scheme???
i hurt my back the monday after working on the car so iv taken a week or so off and im just driving it
i did take off all the tins in the engine bay and sprayed them, along with a few other bits to neaten it up in there.
ill get some pics later, just popping up asda to buy a new xd card as turns out my card was nicked and the 2gb one i bought isnt supported by the cam… GAY!
anyway..
but the main reason for this post was to get peoples opinions on colour choice
i photoshopped this to see what the colours i was going for would look like and i REALLY like it. what do ya all think:
it was from this photo that i made it from, and as you can see its slightly lowered too im new at doin stuff like that on Photoshop but i thought it turned out well
so…. what ya all think about the new colour scheme???
booze and boredom, the greatest mix
Posted
Local Hero
I like it - Different!
Nice set of white alloys would set it off - White and chrome BBS splits maybe… 8)
Nice set of white alloys would set it off - White and chrome BBS splits maybe… 8)
My Build Thread
All My Build Photos - https://www.flickr.com/photos/pix-al/albums/72157622794406840
My other hobby - www.pix-al.co.uk
All My Build Photos - https://www.flickr.com/photos/pix-al/albums/72157622794406840
My other hobby - www.pix-al.co.uk
Posted
Settled In
looks good mate
Posted
Old Timer
AL_Mk1 said
I like it - Different!
Nice set of white alloys would set it off - White and chrome BBS splits maybe… 8)
sounds good to mee well, cream to match the top half… hmmmm
ill get on the Photoshop again later when the hang over wears off
booze and boredom, the greatest mix
Posted
Settled In
Well done on progress so far. I am doing something similar and will be attempting the two colour paint job.
Current MK1 rebuild elapsed time - 15 years and counting…
Is it normal to clean and paint bits of your car that will never be seen?
Not-so-new addition - 1996 MK1 Citi Golf (off the road for 4 years… and counting)
Is it normal to clean and paint bits of your car that will never be seen?
Not-so-new addition - 1996 MK1 Citi Golf (off the road for 4 years… and counting)
0 guests and 0 members have just viewed this: None.