MK1 2036cc 16v ITB's 200+ BHP Project 1994 to 2011
Posted
Settled In
MK1 2036cc 16v ITB's 200+ BHP Project 1994 to 2011
The Engine has completely new Bearings through out Genuine VW .
The Engine has been built to withstand the additional 150bhp of Nitrous with the Forged Pistons and H - Beam rods and is putting out arround 225BHP NASP .
Ran a 13.39 sec 1/4 mile NASP at York Last Week
Posted
Settled In
BROOKSTER said
The Kit is from Wizards of Nos , but built up from 2 kits.
The Engine has completely new Bearings through out Genuine VW .
The Engine has been built to withstand the additional 150bhp of Nitrous with the Forged Pistons and H - Beam rods and is putting out arround 225BHP NASP .
Ran a 13.39 sec 1/4 mile NASP at York Last Week
Excellent :mrgreen:
I might ask for some info regarding the '2 kits' in the near future. 8) Will defo be running nitrous with carbs on my ABF if the standard internals allow however i'm assuming you bored it out to 2.1L for this reason
Did you get the internal stock replacements like bearings from gsf?
Cheers
Posted
Settled In
GaryGTi83 said
BROOKSTER said
The Kit is from Wizards of Nos , but built up from 2 kits.
The Engine has completely new Bearings through out Genuine VW .
The Engine has been built to withstand the additional 150bhp of Nitrous with the Forged Pistons and H - Beam rods and is putting out arround 225BHP NASP .
Ran a 13.39 sec 1/4 mile NASP at York Last Week
Excellent :mrgreen:
I might ask for some info regarding the '2 kits' in the near future. 8) Will defo be running nitrous with carbs on my ABF if the standard internals allow however i'm assuming you bored it out to 2.1L for this reason
Did you get the internal stock replacements like bearings from gsf?
Cheers
no GSF ones are no good when your revving the engine to 8500rpm
Posted
Settled In
still work in progress
Posted
Settling In
KNOWLEDGE IS HORSEPOWER
Posted
Settled In
havn't been on for a while so i need to update my project .
MSA Spec cage fitted now which i'll load some photo's of, cage is so i can enter the VWDRC which my mates race in at the moment.
The MK1 is running 13.40 sec 1/4 & 1.9 60ft & 106mph nasp at the moment , havn't running it on Nitrous yet or with M/T Drag tyres so there's a couple more seconds to knock off the 1/4 mile time yet .
Posted
Moderator
Merry Christmas to you too
Smudger
Posted
Settled In
106mph terminal is NICE!!
The Mk1 Golfs older and better looking sibling……..
Posted
Newbie
MK1 2036cc 16v ITB's 200+ BHP Project 1994 to 2011
Posted
Settled In
0 guests and 0 members have just viewed this: None.