Building solid brake lines
Posted
#1422147
(In Topic #187370)
Settled In
Things I have acquired in this time are new flexi hoses and 9" servo and mc.
What fluid bottle will fit the master cylinder? Any mk2?
How much line will I need to buy and what's better, online or Gfs/euro etc? Also what connectors as I'm sure mine were all scrap?
Flaring tools? (on a budget)
And any fitting advice on bending,flaring, lengths to cut?
Sorry if such basic questions but I don't usually mess with brakes but need them sorting so I can fire up the conversion!
Posted
Newbie
have a look here at link below , it costs a tenner more than the kit and the flaring tool, these are made to measure and have the unions on them.
just be careful bending them, bend then round a can or hammer, and apply mild heat if necessary.
avoid tight bends.
have a look at another golf with the original pipework for reference..
you cant go too wrong.
Dave
http://www.vwheritage.com/vw_spares_Brake-pipe-set-Mk1-GolfJetta-CNickel-6-piece-171698500_act_shop.product_pID_55956170.htm
0 guests and 0 members have just viewed this: None.