Mk1 cab 20v turbo AGU conversion

Hi Can any one help. I'm nearing the end of a full restoration of a Cab. I've decided to put a 20v turbo (AGU) in. I've had the wiring loom done but on the strip down I literally removed all the wiring and fuse box. Stupidly I didn't take any pics of the fuse box prior to pulling everything out.

I can tell where the main plugs fit but there are quite a few individual wires that need plugging in to the fuse box.

Does anyone have any actual pics. Of a complete fuse box (the plug side) so I could use as a guid. I've seen quite a few diagrams but can't really seam to get my head round them.

its also a similar situation in the engin bay. I did label most of them up and the guy that has done the ecu conversion has also labeled some up but again there seams to be quite a few individual ones that need a home.


Does any one have any close up pics of the wiring/engine of a completed conversion or any help advice/help would be greatly appreciated.

thanks

best thing to do is take pics of what you are unsure of and colour combinations of wires to help determine whats what

as above piccy up what you got