1.8T Head Problem??

Hi there

I spilt my head and block apart to check condition of pistons and bores and valves and to replace head gasket.

I lined the to grooves on the timing belt sprocket and the cam cover before I removed the belt, when I removed the head the inlet valves on cylinder 2 where open ever so much and exhaust valves on cylinder 3 where open ever so much.

My question is what is this down too?
Is the timing chain off a tooth or is this normal? The valves themselfs seem in good condition and dont seem bent if that what people are thinking.

Thanks in advance

Sounds normal to me, very basically if no 1 is on just about to spark, no 2 or 3 will have just fired  so no 2 or 3 (don't know the firing order) will be next to fire, requiring either exhaust or inlet valves to be opening/closing.

Thanks buddy!

Just wanted to clear that up.

Many Thanks