Philips Mk1 Jetta 1.9 TDI PD130 Project
Posted
Settled In
Philips Mk1 Jetta 1.9 TDI PD Project
This wee grommet arrived today from Greece today, simple but effective
Posted
Settled In
Whilst fitting the drivers lower dash trim, I found the cubby holder was fouling the relief relay mount, and ain't nobody got time for that lol so I cut and wrapped the panel with leatherette which turned out quite good
The trim is more taught now but wait till you see the next update 😉
The trim is more taught now but wait till you see the next update 😉
Posted
Settled In
I set about installing the original front floor sound deadening but it was completely worn out what with the pervious owner wearing through the original carpet and though to the metal floor, so I cut to shape a …. yoga mat made of memory foam, yep what else would you use lol
I tidied up the floor looms and bonded the lining down, then installed the like new front carpet section and cut wee sections that fouling and now the carpet fits perfectly.
I connected the lower console and wired in perfectly routing the loom through to the engine for the oil pressure and oil temp guage, I fitted the rest of the lower dash and now it's finished 😊
I tidied up the floor looms and bonded the lining down, then installed the like new front carpet section and cut wee sections that fouling and now the carpet fits perfectly.
I connected the lower console and wired in perfectly routing the loom through to the engine for the oil pressure and oil temp guage, I fitted the rest of the lower dash and now it's finished 😊
Posted
Local Hero
I bet that feels good to get the interior on the way sorted now?
Looks tidy
Looks tidy
Andy
LINCOLNSHIRE REGION - https://www.facebook.com/groups/467122313360002/
1983 MK1 Golf GTI Campaign Model - Under (looooong) resto!
1962 Rover P4 80
2002 BMW 745i
2008 BMW Z4 2.5Si
LINCOLNSHIRE REGION - https://www.facebook.com/groups/467122313360002/
1983 MK1 Golf GTI Campaign Model - Under (looooong) resto!
1962 Rover P4 80
2002 BMW 745i
2008 BMW Z4 2.5Si
Posted
Settled In
Hey hairyarse, good to see someone's still interested…lol thank you matey
Yea the interiors finished bar the front seats, I don't want them getting dirty getting in and if if the car just yet, apart from that's it's good to go
Yea the interiors finished bar the front seats, I don't want them getting dirty getting in and if if the car just yet, apart from that's it's good to go
List of past and present cars ive owned
1997 corsa 1.2 poop
2003 Ibiza 130 tdi hybrided to 240bhp
1991 Mk 2 jetta calypso green 1.6td
2001 MG ZT 190+ v6 in trophy blue…. Sold to my brother
2003 Golf GTI TDI 150 black leather heated recaros the
1997 corsa 1.2 poop
2003 Ibiza 130 tdi hybrided to 240bhp
1991 Mk 2 jetta calypso green 1.6td
2001 MG ZT 190+ v6 in trophy blue…. Sold to my brother
2003 Golf GTI TDI 150 black leather heated recaros the
Posted
Settled In
At the start of the week, I made the brake lines… this time using a pipe bending tool, it looks nice in my opinion
One thing I did was have each section made in to two Separate parts, so if one segment gets damaged or needs rerouted, I can remove it and change it around
One thing I did was have each section made in to two Separate parts, so if one segment gets damaged or needs rerouted, I can remove it and change it around
Posted
Settled In
I decided to shoehorn the engine in and see what needs modified, I found the mk4 servo and master cylinder to be abit too far forward and making clearance a bit of an issue, but one of the guys in work suggested using a mk 3 servo as it's a good replacement and slimmer fitting, so I'm on the hunt for a good one.
The charge side of the turbo needs rotated downwards
I'm also trying to get the driveshafts modified, made which is proving difficult but it'll work out I'm sure
The charge side of the turbo needs rotated downwards
I'm also trying to get the driveshafts modified, made which is proving difficult but it'll work out I'm sure
Posted
Local Hero
Those brake pipes are a work of art!! Nice one
Andy
LINCOLNSHIRE REGION - https://www.facebook.com/groups/467122313360002/
1983 MK1 Golf GTI Campaign Model - Under (looooong) resto!
1962 Rover P4 80
2002 BMW 745i
2008 BMW Z4 2.5Si
LINCOLNSHIRE REGION - https://www.facebook.com/groups/467122313360002/
1983 MK1 Golf GTI Campaign Model - Under (looooong) resto!
1962 Rover P4 80
2002 BMW 745i
2008 BMW Z4 2.5Si
Posted
Settled In
Hairyarse said
Those brake pipes are a work of art!! Nice one
Thanks matey, yea they look good.
List of past and present cars ive owned
1997 corsa 1.2 poop
2003 Ibiza 130 tdi hybrided to 240bhp
1991 Mk 2 jetta calypso green 1.6td
2001 MG ZT 190+ v6 in trophy blue…. Sold to my brother
2003 Golf GTI TDI 150 black leather heated recaros the
1997 corsa 1.2 poop
2003 Ibiza 130 tdi hybrided to 240bhp
1991 Mk 2 jetta calypso green 1.6td
2001 MG ZT 190+ v6 in trophy blue…. Sold to my brother
2003 Golf GTI TDI 150 black leather heated recaros the
Posted
Settled In
This past week, I've been knee deep in the passengers front electrics in the engine bay, thinning the looms a bit and tightening the looms up, I also set about making my own fuse box equivalent and I think I've cracked it, it just needs tidying up but you get the picture 😁
I'm in contact which Dave Mac in Coventry who will be making driveshafts for me, expensive to me but they're bulletproof and won't fail, good people to talk too but going to get the measurements and see what happens
I'm in contact which Dave Mac in Coventry who will be making driveshafts for me, expensive to me but they're bulletproof and won't fail, good people to talk too but going to get the measurements and see what happens
Posted
Settled In
Well it's been a month and wellllll….. I've booked the jetta's MOT for the 27th of July, things are coming along nicely.
The electrics on the passengers front area is finished.
Then fitting the rad and intercooler finally with vibration dampers holding it securely.
The electrics on the passengers front area is finished.
Then fitting the rad and intercooler finally with vibration dampers holding it securely.
Posted
Settled In
I finally received my new 100% custom made driveshafts from Dave Mac, great job and with 2 inner and outer cv boots fitted earlier today, they look fantastic, I don't have a photo yet of the finished article but they are now completed, here's a few photos of the shafts as they arrived on Wednesday with the cv joints also painted and now fitted
Posted
Settled In
Today the car is going to get taken away to get the down pipe of the exhaust replaced because the turbo has changed its location what with the tubular manifold being fitted now, all being well, should be there before 6pm.
I've fitted the shafts after assembling them and have the engine back in, both rear brake flexis are now modified front brake flexis and as that's an easy mod and 1000000% better… also both rear wheel bearings are now replaced with shiny new ones and both front seats in with new genuine seat rail clips
I've fitted the shafts after assembling them and have the engine back in, both rear brake flexis are now modified front brake flexis and as that's an easy mod and 1000000% better… also both rear wheel bearings are now replaced with shiny new ones and both front seats in with new genuine seat rail clips
List of past and present cars ive owned
1997 corsa 1.2 poop
2003 Ibiza 130 tdi hybrided to 240bhp
1991 Mk 2 jetta calypso green 1.6td
2001 MG ZT 190+ v6 in trophy blue…. Sold to my brother
2003 Golf GTI TDI 150 black leather heated recaros the
1997 corsa 1.2 poop
2003 Ibiza 130 tdi hybrided to 240bhp
1991 Mk 2 jetta calypso green 1.6td
2001 MG ZT 190+ v6 in trophy blue…. Sold to my brother
2003 Golf GTI TDI 150 black leather heated recaros the
Posted
Settled In
This past week I put the Jetta on all 4's and had it taken away to get the downpipe exhaust, finished and good to go….. I genuinely had forgotten how clean it was underneath but once it's home over the weekend, it's time to put its mask on 😊
Posted
Settled In
This past month has been crazy getting things finished, charge pipes, rad pipes, bonnet, arches, bumper fitted, and all niggles in between including starting it for the first time and bedding the cam in! It's down in work now with the headlights aligned, brake and shock test passed, traction control working, abs light out, now I just need to fit the steering wheel air bag resistor and oil pressure switch as well as two door seals… mot is on Thursday at 12:15 so if you want to wish me luck…. please wish away 😉
Posted
Settled In
This past month has been crazy getting things finished, charge pipes, rad pipes, bonnet, arches, bumper fitted, and all niggles in between including starting it for the first time and bedding the cam in! It's down in work now with the headlights aligned, brake and shock test passed, traction control working, abs light out, now I just need to fit the steering wheel air bag resistor and oil pressure switch as well as two door seals… mot is on Thursday at 12:15 so if you want to wish me luck…. please wish away 😉
Posted
Old Timer
That thing will be madness on the street! Best of luck and keep us posted on how MOT pans out.
Posted
Settled In
well guy's and Gail's….. it's legit…. SHE PASSED MOT!!!!
So friggin happy and this past 2 weeks of full on late night tweeking to finish it has been tough but me and my friends have just drove around Belfast and nearly everyone was staring or giving the thumbs up! Completely worth it haha!
So friggin happy and this past 2 weeks of full on late night tweeking to finish it has been tough but me and my friends have just drove around Belfast and nearly everyone was staring or giving the thumbs up! Completely worth it haha!
Posted
Old Timer
That's awesome man! It's nice to see all of that hard work paying off. Congrats!
Posted
Settled In
Thank you matey! It's been awesome to drive it around after so long, alas the trade plates are going back to work tomorrow so next step is to Refurb the wheels again and wait till the new reg number arrives in the post, currently Swansea has the forms I sent so I'm waiting for them to send the reg, once it's on the car, it'll be 100% legal to drive 😉😎😃😁
The only show I'll be going to this year is edition 38 at overstone park near Northampton! I've been 5 times and really looking forward to the camping, BBQ, beers, banter and cars 😁
The only show I'll be going to this year is edition 38 at overstone park near Northampton! I've been 5 times and really looking forward to the camping, BBQ, beers, banter and cars 😁
List of past and present cars ive owned
1997 corsa 1.2 poop
2003 Ibiza 130 tdi hybrided to 240bhp
1991 Mk 2 jetta calypso green 1.6td
2001 MG ZT 190+ v6 in trophy blue…. Sold to my brother
2003 Golf GTI TDI 150 black leather heated recaros the
1997 corsa 1.2 poop
2003 Ibiza 130 tdi hybrided to 240bhp
1991 Mk 2 jetta calypso green 1.6td
2001 MG ZT 190+ v6 in trophy blue…. Sold to my brother
2003 Golf GTI TDI 150 black leather heated recaros the
0 guests and 0 members have just viewed this: None.