RUSTY'S BECOMES "ROXY" - FINISHED AND FINAL PICS 9/12/13 - SOLD
Posted
Old Timer
mark83 said
Awesome work !!factory sunroof looks great not the easiest part of a restoration .Not long then before you turn your attention to the swallowtail again .
the swallowtail will be my final masterpiece …..i have a few tricks up my sleeve for that…..guess everyone will have to stay tuned
Posted
Old Timer
MK1 Golf - 1.3l Driver
MK1 Golf - 1.8 GTI (Build Thread - Here)
MK1 Golf - 1.8 GTI (Build Thread - Here)
Posted
Old Timer
wannabemk1owner said
Stunning!!!
thank you
Posted
Design Manager
2018 Up! GTi 1.0 TSI
2015 Mk7 Golf R 2.0 TSI 4motion DSG
2011 Caddy Maxi Kombi 1.6 TDi
1982 Mk1 Golf GTi 3 Door 1.8t - Build Thread
Posted
Old Timer
Joe90k said
Love this mate, I remember looking at it early on when it was purple and thinking it looked a heap, but now it looks awesome! Credit to you!
thanks mate…….its just too hot to work on it at the moment, the garage is like a oven…..
Posted
Secretary
First Golf, lots of work. I've started so I'll finish!
Posted
Old Timer
http://www.ebay.co.uk/itm/171072135466?ru=http%3A%2F%2Fwww.ebay.co.uk%2Fsch%2Fi.html%3F_from%3DR40%26_sacat%3D0%26_nkw%3D171072135466%26_rdc%3D1
'83 Lhasa Green GTi
Posted
Old Timer
clarksmk1 said
thanks a scarey link lol
Posted
Moderator
clarksmk1 said
Wow that is similar
Posted
Old Timer
Posted
Old Timer
Swallowtail_uk said
maybe i should buy it and covert it to the jetta front that i got of rusty lol
Posted
Old Timer
Brought this front end off the forum….i dont know why, but i thought i'd try it on…..then it goes into the loft
Stripped down some of my parts and sent them away for replating….clean then parts up first on the grinder wire wheel
undoing the bonnet release cable the screw snapped clean off, so i have redrilled and threaded it, with a new stainless steel bolt
front underlay in
Jamex pads off…….new original style pedals in
front carpet in…..looking sweet….
A Pillar trims, cleaned and replaced
Brand new Hella wiper blades (keep it germany)
Clock surround / brezel refurbed……what a pain in the back side…..
Original warning sticker replaced….
Parts back from the platers…. yes there are other extra bits also lol
WUR - refurbed
Metering head
Fuel Lines - refurbed
thats it for now folks.
Last edit: by Swallowtail_uk
Posted
Design Manager
Joe
2018 Up! GTi 1.0 TSI
2015 Mk7 Golf R 2.0 TSI 4motion DSG
2011 Caddy Maxi Kombi 1.6 TDi
1982 Mk1 Golf GTi 3 Door 1.8t - Build Thread
Posted
Old Timer
Joe90k said
Loving this mate, where did you get the parts stripped and plated and how much did it cost if you don't mind me asking?
Joe
I use a company in bham, near to my work place which is handy. I clean the parts 1st on the grinder, wire wheel, then they get put into acid cleaner (de ruster) then they are plated to colour. I normally spend £20 for a lunch box size (that might be mates rates, as I've been going there for a long time)
Posted
Moderator
Posted
Old Timer
smudger said
Loving the attention to detail on this project mate. Top marks.
thanks mate…..not long now and she will be finished and up for sale….hoping edition 38.
Posted
Moderator
Posted
Old Timer
Posted
Old Timer
Posted
Old Timer
Dash in..
Original Stereo Plug…..normally gets cut out….
Front Bumper: new bumper, new lens & holders, new bolts and freshly power coated number plate bracket.
Abit of detailing in the boot - new galavanized washer bottle bracket ….(im not using that bottle in the pic)
Loads of waxoyl
Mud guards then fitted with new bolts & washers
New washer & nuts (greased over prevent rust) for the wiper arms:
New handle gaskets and seat runners:
Front grill close ups, (notice the galavanised bonnet lock)
Quick shot of the engine bay ……(this is much more cleaner now…..new washer bottle, hose clips etc - pics to come of this)
Due to a few running problems i have decided to remove the patrol tank and clean it out as well as clean out the lines, accumulator and fuel pump. whilst going this far, i decide to detail a few things
Lock in wheel nut key:
My platers managed to lose the brake compensator spring, so i have a new one made up:
and then of course replated along with the battery holder & bolt
After all of that, abit of fine tune by brother (thanks bro) …….we were off to MOT, fingers crossed.
Quick run to the MOT …..see if i missed anything:
YAAAAAAYYYYYYYYYYYYYYYYY only one advisory - ball joint had slight play and cover ripped.
Wasn't as bad as i had ripped the cover off before the picture…
Brand new arches and a few finished touches…….nearly there…oh tax too!!!
Drove it to BMTR - as i had a slight exhaust blow, just needed it re worked - they loved the golf there:
Then it went to HI Tech Motorsports (k jet specialists) for a rolling roads tune:
Heres a Video for you all
0 guests and 0 members have just viewed this: None.