my latest project
Posted
#1543759
(In Topic #206354)
Old Timer
After selling my campaign project i instantly regretted it and needed another tintop project . ( as my campaign project is no more decided i would over write my new project on the old campaign project pages) So i bought another mk1 as it was only 30 miles from me. Arrived with many parts missing, more than i actually realised, for instance no accelerator pedal. I found one on ebay and here it is brought back to shiny metal awaiting its repaint..
Last edit: by abfmk1
Posted
Posted
Posted
Posted
Posted
Posted
Old Timer
Nice painted wishbones, with new ball joints and rubbers, and a nice rust free pair of rear w/bone mounts with new clamps , and new stainless wishbone/ antiroll bar mounts
Last edit: by abfmk1
Posted
Old Timer
Painted up original strut housings, new/unused febi top mounts and new/unused bilstien b4 inserts.
Last edit: by abfmk1
Posted
Old Timer
The unused so far, 1.8t engine and 02j gearbox conversion mounts.
Last edit: by abfmk1
Posted
Old Timer
Cabriolet 100 mm hub assemblies, derusted, painted and new wheel bearings inserted
Last edit: by abfmk1
Posted
Posted
Old Timer
Used ABF flywheel with new bolts and new vr6 clutch assy to replace standard 1.8t flywheel assy. Usual recomended conversion.
Last edit: by abfmk1
Posted
Posted
Old Timer
New unused steering rack with new unused steering arms ( i planned to put an adjustable arm on both sides ) and new unused rubber gaiters.
Last edit: by abfmk1
Posted
Old Timer
Modified brake cross over linkage to allow fitting of clutch master cylinder..
Last edit: by abfmk1
Posted
Old Timer
New/unused 16v type cambelt tensioner and new/unused epytec spacer. These are needed as original 1.8t tensioner fouls on the modified mk1 golf conversion mount, and needs removing.
.
.
Last edit: by abfmk1
Posted
Old Timer
di tt exhaust manifold
Posted
Posted
Posted
Old Timer
edit
There are too many online users to list.