Mellow Yellow 3.2ltr 24v Conversion
Old Timer
Posted
Old Timer
Then to finish off used Luxury liner pro.
Tonight i sprayed on some more epoxy to seal the areas I sanded. At the weekend I will finish final spots and move on to high build
Posted
Newbie
Giving me plenty of ideas for my own project
Sent from my E5823 using Tapatalk
Posted
Old Timer
Bit of a slow down recently, the grey epoxy I sprayed on seems to have softened in places after spraying polyester filler. The products were from the same company and were compatible but I believe the Xylene thinners caused the issues. Anyhow it's starting to harden now which is the main thing but this is how it looks now.
Last edit: by Rich.
Posted
Old Timer
Soaked in rust remover to start
Then brass wire wheel
Then back in the rust remover solution for the night
Last edit: by Rich.
Posted
Old Timer
Last edit: by Rich.
Old Timer
Oh warnings ahead there are pictures of paint drying Gave the calipers and carriers
another soak in Bilt Hamber Deox C
I gave them a further soak and left them for 24 hours then rinsed them off and used POR 15 metal ready to neutralise and zinc phosphate coat them until I get round to painting them.
Ordered up a full caliper and carrier rebuild kit including new pistons
Last edit: by Rich.
Posted
Old Timer
Last edit: by Rich.
Old Timer
Old Timer
Last edit: by Rich.
Old Timer
A bit more Bilt Hamber flat face sprayable filler.
Last edit: by Rich.
Old Timer
Last edit: by Rich.
Old Timer
Last edit: by Rich.
Posted
Old Timer
Matt
Posted
Local Hero
pazwaa said
Engine bay is looking very nice
Matt
Ditto!!
The calipers came up well too after a good soaking
Andy
LINCOLNSHIRE REGION - https://www.facebook.com/groups/467122313360002/
1983 MK1 Golf GTI Campaign Model - Under (looooong) resto!
1962 Rover P4 80
2002 BMW 745i
2008 BMW Z4 2.5Si
LINCOLNSHIRE REGION - https://www.facebook.com/groups/467122313360002/
1983 MK1 Golf GTI Campaign Model - Under (looooong) resto!
1962 Rover P4 80
2002 BMW 745i
2008 BMW Z4 2.5Si
Old Timer
Old Timer
I have primed everywhere a couple times and seam sealed where required.
I put Upol Gravitex stone chip on Friday which came out better than I expected. Will do one last prime and flat down tomorrow.
Tuesday this week everything will be body colour
Last edit: by Rich.
Old Timer
Old Timer
Old Timer
Not so shiny at the mo but with a bit of compounding should come out nice. Put 6 coats on for good measure.
Last edit: by Rich.
0 guests and 0 members have just viewed this: None.