G60 Conversion
Posted
Old Timer
RichG said
Can anyone confirm whether I need 76mm or 94mm lug mounts on the golf? I have gti calipers at present.
As soon as I know I will order up
Posted
Moderator
Not sure to be honest. You should try asking the question in the running gear section mate, someone might be able to help in there.
Posted
Old Timer
I have changed direction with my 20v build and have a G60 engine on it's way from Hibbs I had a Corrado G60 before and loved the sound and instant performance of the charger.
Anyway I have treated my self to some KW V1 inox coilovers
And a new steering wheel From this :-
To this:-
Anyway I have treated my self to some KW V1 inox coilovers
And a new steering wheel From this :-
To this:-
Last edit: by Rich.
Posted
Moderator
Can't go wrong with KW's mate IMO. Lovely bits of kit. Good luck with the conversion. what sort of timescale have you got for it??
Posted
Old Timer
smudger said
Can't go wrong with KW's mate IMO. Lovely bits of kit. Good luck with the conversion. what sort of timescale have you got for it??
Ha that was weird, the page was still submitting when I got your message on my phone lol.
The engine will be dressed over the summer with Installation starting when I take the car off the road for the winter. Should get it done quite quickly If I start to get parts together now
Posted
Local Hero
Nice new bits there Like the wheel
G60 will be nice too, good call
G60 will be nice too, good call
Andy
LINCOLNSHIRE REGION - https://www.facebook.com/groups/467122313360002/
1983 MK1 Golf GTI Campaign Model - Under (looooong) resto!
1962 Rover P4 80
2002 BMW 745i
2008 BMW Z4 2.5Si
LINCOLNSHIRE REGION - https://www.facebook.com/groups/467122313360002/
1983 MK1 Golf GTI Campaign Model - Under (looooong) resto!
1962 Rover P4 80
2002 BMW 745i
2008 BMW Z4 2.5Si
Posted
Old Timer
Received my G60 engine today, big thanks to Hibbs Quickly got it on the engine stand for a clean down tomorrow, my G60 mount arrived from retrofication as well
Stage 4 baby
Stage 4 baby
Last edit: by Rich.
Posted
Local Hero
RichG said
Stage 4 baby
Not so cool with the hand though - ouch!
Andy
LINCOLNSHIRE REGION - https://www.facebook.com/groups/467122313360002/
1983 MK1 Golf GTI Campaign Model - Under (looooong) resto!
1962 Rover P4 80
2002 BMW 745i
2008 BMW Z4 2.5Si
LINCOLNSHIRE REGION - https://www.facebook.com/groups/467122313360002/
1983 MK1 Golf GTI Campaign Model - Under (looooong) resto!
1962 Rover P4 80
2002 BMW 745i
2008 BMW Z4 2.5Si
Posted
Old Timer
OK the project is under way!
Can you see whats missing
Just needs a good clean up
Can you see whats missing
Just needs a good clean up
Last edit: by Rich.
Posted
Moderator
A leg off the hoist?
Posted
Old Timer
smudger said
A leg off the hoist?
Ha it was pretty tricky removing the engine with only one leg on the hoist
Posted
Old Timer
G60 engine is stripped back for prep and painting
Last edit: by Rich.
Posted
Old Timer
Fuel tank is ready for restoration :
Last edit: by Rich.
Posted
Old Timer
I've spent absolutely thousands on new parts.
Complete hydraulic clutch kit
KW Coilovers V1
New 9 Inch servo and 22mm Master cylinder
Restored engine mounts (Front and Rear)
Just caddys 02J engine mounts and G60 mount
From Bartek:
1 x G60 Sprinter intercooler KIT (2160sprinter03)
1 x G60 Gasket for outlet-pipe BAR-TEK® (2160086)
1 x G60 Outlet pipe for big intercooler BAR-TEK® (2160085)
1 x G60 Aluminium piping ONLY Bypass pipes BAR-TEK colorblack (216083)
1 x Short Oilfilter (2100011)
1 x G-Lader Oilhoses-Kit complete G-LaderG60 (1160004)
1 x Oil dipstick holder (2160089)
1 x G60 Waterpump SKF (2160046)
1 x G60 timing belt with tensiator (2160049)
1 x Oilcooler-Kit G60 (2260006)
1 x G60 Wateroutlet front cylinderhead (2160097)
1 x G60 Wateroutlet side cylinderhead (2160197)
1 x Sealing compound Dirko HT (2100026)
1 x G60 G-Lader Inlet flange BAR-TEK® (2160104)
1 x G60 G-Lader Cover BAR-TEK® (1160015)
1 x VA-Bolts-Kit G60 Lader (1160001)
1 x G60 Aluminium Pully BAR-TEK® (2160187)
8 x G60 stud bolt for Cylinderhead (2160183)
1 x G60 & 16VG60 Alloy Alternator Pulley BAR-TEK® (216016120)
1 x G60 Pully 68mm (2160001)
1 x VW aluminium pully BAR-TEK (2100057)
VW Spares:
1 x 3000.384.001 Clutch Kit (3000.384.001)
1 x 4264.87D Thermostat (4264.87D)
1 x 1001211027 Thermostat Housing (1001211027)
4 x WR6DP0 Spark Plug (WR6DP0)
1 x EVL134 Rotor Arm (EVL134)
1 x VK355 Distributor Cap (VK355)
1 x VK382 Distributor Cap (VK382)
1 x ZEF561 Lead Set (ZEF561)
1 x 758.728 Valve Cover Gasket (758.728)
1 x 495.620 Sump Gasket (495.620)
1 x 07407 Sump Pan (07407)
2 x Quantum Synta 10w40 (5-Litre) (Synta5L)
1 x 03272 Sump Plug (03272)
1 x 07215 Sump Plug Seal (07215)
1 x WK830/7 Fuel Filter (WK830/7)
1 x 1008009050 Temperature Sender (1008009050)
1 x 18666 Temp Sender (18666)
Only Charged Dubs :
BBM Alloy Fuel Rail
BBM Fuel Rail Fitting Kit, 8v Digifant, 16v
BBM Fuel Rail FPR Adapter
Bolt Kit for G60 Flywheel and Clutch Kit
Red Top Bosch 315cc Injectors
SNS Chip
G60 Supercharger Rebuild Service
Complete hydraulic clutch kit
KW Coilovers V1
New 9 Inch servo and 22mm Master cylinder
Restored engine mounts (Front and Rear)
Just caddys 02J engine mounts and G60 mount
From Bartek:
1 x G60 Sprinter intercooler KIT (2160sprinter03)
1 x G60 Gasket for outlet-pipe BAR-TEK® (2160086)
1 x G60 Outlet pipe for big intercooler BAR-TEK® (2160085)
1 x G60 Aluminium piping ONLY Bypass pipes BAR-TEK colorblack (216083)
1 x Short Oilfilter (2100011)
1 x G-Lader Oilhoses-Kit complete G-LaderG60 (1160004)
1 x Oil dipstick holder (2160089)
1 x G60 Waterpump SKF (2160046)
1 x G60 timing belt with tensiator (2160049)
1 x Oilcooler-Kit G60 (2260006)
1 x G60 Wateroutlet front cylinderhead (2160097)
1 x G60 Wateroutlet side cylinderhead (2160197)
1 x Sealing compound Dirko HT (2100026)
1 x G60 G-Lader Inlet flange BAR-TEK® (2160104)
1 x G60 G-Lader Cover BAR-TEK® (1160015)
1 x VA-Bolts-Kit G60 Lader (1160001)
1 x G60 Aluminium Pully BAR-TEK® (2160187)
8 x G60 stud bolt for Cylinderhead (2160183)
1 x G60 & 16VG60 Alloy Alternator Pulley BAR-TEK® (216016120)
1 x G60 Pully 68mm (2160001)
1 x VW aluminium pully BAR-TEK (2100057)
VW Spares:
1 x 3000.384.001 Clutch Kit (3000.384.001)
1 x 4264.87D Thermostat (4264.87D)
1 x 1001211027 Thermostat Housing (1001211027)
4 x WR6DP0 Spark Plug (WR6DP0)
1 x EVL134 Rotor Arm (EVL134)
1 x VK355 Distributor Cap (VK355)
1 x VK382 Distributor Cap (VK382)
1 x ZEF561 Lead Set (ZEF561)
1 x 758.728 Valve Cover Gasket (758.728)
1 x 495.620 Sump Gasket (495.620)
1 x 07407 Sump Pan (07407)
2 x Quantum Synta 10w40 (5-Litre) (Synta5L)
1 x 03272 Sump Plug (03272)
1 x 07215 Sump Plug Seal (07215)
1 x WK830/7 Fuel Filter (WK830/7)
1 x 1008009050 Temperature Sender (1008009050)
1 x 18666 Temp Sender (18666)
Only Charged Dubs :
BBM Alloy Fuel Rail
BBM Fuel Rail Fitting Kit, 8v Digifant, 16v
BBM Fuel Rail FPR Adapter
Bolt Kit for G60 Flywheel and Clutch Kit
Red Top Bosch 315cc Injectors
SNS Chip
G60 Supercharger Rebuild Service
Posted
Old Timer
Oh and loads of bits from VW lol
I want the engine to look like new when fitted.
RubJohny will sort me out with my loom conversion. I think I have most bits but need to sort out a manifold and exhaust system, radiator maybe and a few fuel components (lines etc.)
I want the engine to look like new when fitted.
RubJohny will sort me out with my loom conversion. I think I have most bits but need to sort out a manifold and exhaust system, radiator maybe and a few fuel components (lines etc.)
Last edit: by Rich.
Posted
Old Timer
Does anybody know how to remove the oil filter thermo plate? I can see some bolts that attach it to the block but these are obscured by the plate.
Posted
Old Timer
Update:
My fuel tank got picked up for its restoration yesterday.
Also received my rebuilt supercharger from Matt at Only Charged Dubs as well as my bbm alloy fuel rail, red top injectors and sns chip. Excellent customer service, communication was brilliant.
He noticed my Jabbasport stage 4 charger wasn't ported out on the intermediate shaft and sorted that for me
Pics to follow!
My fuel tank got picked up for its restoration yesterday.
Also received my rebuilt supercharger from Matt at Only Charged Dubs as well as my bbm alloy fuel rail, red top injectors and sns chip. Excellent customer service, communication was brilliant.
He noticed my Jabbasport stage 4 charger wasn't ported out on the intermediate shaft and sorted that for me
Pics to follow!
Posted
Moderator
Man, this car is going to be a beast!! bet you cant wait to unleash it!
Posted
Settled In
loving the build mate much prefer the new direction of the G60 lump
just wanted to say i want your garage SO much space haa
just wanted to say i want your garage SO much space haa
Posted
Old Timer
looks good mate. Good choice on the G60. One of my favourite engines in a mk1. It is going to look so good in your bay. The corrado looks very nice by the way .
0 guests and 0 members have just viewed this: None.