My Resto 1982.... New engine start videos.
Posted
#767897
(In Topic #92541)
Old Timer
My Resto 1982.... ENGINE START! With video!
Hey
This is the second time i had have to type all this post out as i accidently crossed it off grrrr. The annoyance!
Im completely restoring my 1982 golf gti that i bought a few monthes back from a man on ebay for ?75! Very very good buy! But it may not seem it from the pictures that follow.
Its all pritty solid. apart from the front and rear valances and thats it.
The man bought it to restore but never had time, he bought it in the same state that i got it and its just been sat on his driveway being neglected.
Now pictures of when i got her back.
Original gti 1800 engine in bits (Might do a 20vt conversion)
And some pics of after i striped her bare.
Some lovely rot
And heres some pics of after abit of bodywork
And thats as far as i have got within a month or so.
Alot of work to doooo
Plus i dislike bodywork and thats what im doing first.
Tell me what you think?
Cheers
Luke
Age 17
_____________________
1982 mk1 golf gti (undesided on colour)
1990 black mk2 golf 1600 driver (First car)
This is the second time i had have to type all this post out as i accidently crossed it off grrrr. The annoyance!
Im completely restoring my 1982 golf gti that i bought a few monthes back from a man on ebay for ?75! Very very good buy! But it may not seem it from the pictures that follow.
Its all pritty solid. apart from the front and rear valances and thats it.
The man bought it to restore but never had time, he bought it in the same state that i got it and its just been sat on his driveway being neglected.
Now pictures of when i got her back.
Original gti 1800 engine in bits (Might do a 20vt conversion)
And some pics of after i striped her bare.
Some lovely rot
And heres some pics of after abit of bodywork
And thats as far as i have got within a month or so.
Alot of work to doooo
Plus i dislike bodywork and thats what im doing first.
Tell me what you think?
Cheers
Luke
Age 17
_____________________
1982 mk1 golf gti (undesided on colour)
1990 black mk2 golf 1600 driver (First car)
Last edit: by lukeybabes
Mk1 Golf Gti Abf conversion Project
Mk2 Golf Gti 16v
Mini Cooper S R53 (Daily)
Posted
Old Timer
wish my lass was as good at stripping!
Posted
Local Hero
Just the job - and not bad for ?75 either…
Looking forward to seeing it get better
Rich
Looking forward to seeing it get better
Rich
Posted
Old Timer
dossent look bad atall for 75 notes mate ill keep an eye out for this resto and trust me that rear arch repair looks alot better then what mine is as mine dosent line up atall so both rear arches might have to come off and re-done im so annoyed as i payed alot of money to have them replaced :cry:
<img>
Posted
Old Timer
I need new front and rear valances, So if anybody has any they would be so kind to sell to me that would be super.
Thanks
Luke
Thanks
Luke
Mk1 Golf Gti Abf conversion Project
Mk2 Golf Gti 16v
Mini Cooper S R53 (Daily)
Posted
Local Hero
Posted
Settled In
That makes my resto look like an oil service lol! Nice one and good luck with it!
Posted
Old Timer
Just bought some New front and rear pannels off www.golfmk1.co.uk along with an entire new lock set as i forgot to pick up the keys when i got the car (dumbass). Then the seller stoped talking to me. hmmm
Didnt have a boot lock or one of the handles anyway.
and a new petrol cap. For ?302.25
Also today i have been getting rid of the wax oil on one of my front inner wings (took so long i only got round 2 doing one.
So alot of time, wire wheel action and white spirt later
Then some primer to finish the job
Took me like 4 hours.
Other side 2moro.
Didnt have a boot lock or one of the handles anyway.
and a new petrol cap. For ?302.25
Also today i have been getting rid of the wax oil on one of my front inner wings (took so long i only got round 2 doing one.
So alot of time, wire wheel action and white spirt later
Then some primer to finish the job
Took me like 4 hours.
Other side 2moro.
Mk1 Golf Gti Abf conversion Project
Mk2 Golf Gti 16v
Mini Cooper S R53 (Daily)
Posted
Local Hero
Posted
Local Hero
Nice work.. I'm suprised how rust free the inner wing was! 8O
Posted
Old Timer
Yeah i know, I was expecting abit. but there was none.
Mk1 Golf Gti Abf conversion Project
Mk2 Golf Gti 16v
Mini Cooper S R53 (Daily)
Posted
Old Timer
If my inner wings look half as good as that when i tackle them i'll be a happy man
Looking good mate 8)
Looking good mate 8)
1989 VW GOLF GTI CABRIO
1997 VW POLO 1.0L
2003 VW PASSAT TDI 130 SPORT
1997 VW POLO 1.0L
2003 VW PASSAT TDI 130 SPORT
Posted
Old Timer
Bought some new wings from TSR Performance the other day.
?80 for the both.
Spending alot of money.
I was bored today so i cleaned up my grill and bought some new headlight surrounds because one was cracked and sprayed up my trim and badge.
Looking pritty mint i thinks.
hung it on my wall till it comes to the time of fitting it to the car.
?80 for the both.
Spending alot of money.
I was bored today so i cleaned up my grill and bought some new headlight surrounds because one was cracked and sprayed up my trim and badge.
Looking pritty mint i thinks.
hung it on my wall till it comes to the time of fitting it to the car.
Mk1 Golf Gti Abf conversion Project
Mk2 Golf Gti 16v
Mini Cooper S R53 (Daily)
Posted
Old Timer
If you look at at the picture of the intieior of the shell on the first post on this forum. there is a number 61 or 67 writen on the dash.
Anybody got any idea what that is?
Pure curiosity.
Luke
_____________________
1982 mk1 golf gti (Going to paint inari Silver)
1990 black mk2 golf 1600 driver - Daily runabout
Anybody got any idea what that is?
Pure curiosity.
Luke
_____________________
1982 mk1 golf gti (Going to paint inari Silver)
1990 black mk2 golf 1600 driver - Daily runabout
Mk1 Golf Gti Abf conversion Project
Mk2 Golf Gti 16v
Mini Cooper S R53 (Daily)
Posted
Old Timer
Just finished cutting out the front and rear pannels because they wer rotten.
Was a much funner job than sanding and wire brushing all the rust off the bodywork.
Just cut it off. lol
Just need to blag a welder now so i can weld the new pannels on.
Any offers?
Bridgwater, somerset area.
Test fit
Scrap
Was a much funner job than sanding and wire brushing all the rust off the bodywork.
Just cut it off. lol
Just need to blag a welder now so i can weld the new pannels on.
Any offers?
Bridgwater, somerset area.
Test fit
Scrap
Mk1 Golf Gti Abf conversion Project
Mk2 Golf Gti 16v
Mini Cooper S R53 (Daily)
Posted
Old Timer
That is such a good car! It will look amazing when its done! 8) Good luck with the rebuild!
Posted
Old Timer
One of my bloody axle stands snaped last night!!
And the golf came tumbling down.
Havnt seen if theres any damage yet, as havnt had time to go over my dads.
Let down
_____________________
1982 mk1 golf gti (Going to paint inari Silver)
1990 black mk2 golf 1600 driver - Daily runabout
My project - http://www.vwgolfmk1.org.uk/modules.php?name=Forums&file=viewtopic&t=32082
And the golf came tumbling down.
Havnt seen if theres any damage yet, as havnt had time to go over my dads.
Let down
_____________________
1982 mk1 golf gti (Going to paint inari Silver)
1990 black mk2 golf 1600 driver - Daily runabout
My project - http://www.vwgolfmk1.org.uk/modules.php?name=Forums&file=viewtopic&t=32082
Mk1 Golf Gti Abf conversion Project
Mk2 Golf Gti 16v
Mini Cooper S R53 (Daily)
Posted
Old Timer
Way to cold to be working on my car the past couple of weeks.
If only i had a big garage.
Sum1 wana do my resto for me? cant be botherd. lol
For free of course
_____________________
1982 mk1 golf gti (Going to paint inari Silver)
1990 black mk2 golf 1600 driver - Daily runabout
My project - http://www.vwgolfmk1.org.uk/modules.php?name=Forums&file=viewtopic&t=32082
If only i had a big garage.
Sum1 wana do my resto for me? cant be botherd. lol
For free of course
_____________________
1982 mk1 golf gti (Going to paint inari Silver)
1990 black mk2 golf 1600 driver - Daily runabout
My project - http://www.vwgolfmk1.org.uk/modules.php?name=Forums&file=viewtopic&t=32082
Mk1 Golf Gti Abf conversion Project
Mk2 Golf Gti 16v
Mini Cooper S R53 (Daily)
Posted
Old Timer
Hang on in there, you know it will be worth it when ur rolling in ur mk1 8)
Posted
Old Timer
I acctually havnt been out to do anything to it in ages.
I realy should.
But i need to get underneith it to sort it out.
I know one of the bolts to hold the rear beam onto the chassis has sheerd off. (I didnt do that)
How would i go about welding a new one on? Would it be safe?
All replys appritiated
Luke
_____________________
1982 mk1 golf gti (Going to paint inari Silver)
1990 black mk2 golf 1600 driver (FOR SALE!!!!!!!!)
1993 White bmw 318is couple (m3 replica) - Daily runabout
My project -
http://www.vwgolfmk1.org.uk/modules.php?name=Forums&file=viewtopic&t=32
082
I realy should.
But i need to get underneith it to sort it out.
I know one of the bolts to hold the rear beam onto the chassis has sheerd off. (I didnt do that)
How would i go about welding a new one on? Would it be safe?
All replys appritiated
Luke
_____________________
1982 mk1 golf gti (Going to paint inari Silver)
1990 black mk2 golf 1600 driver (FOR SALE!!!!!!!!)
1993 White bmw 318is couple (m3 replica) - Daily runabout
My project -
http://www.vwgolfmk1.org.uk/modules.php?name=Forums&file=viewtopic&t=32
082
Mk1 Golf Gti Abf conversion Project
Mk2 Golf Gti 16v
Mini Cooper S R53 (Daily)
There are too many online users to list.