Mk1 caddy project
Posted
#1247427
(In Topic #149280)
Old Timer
Mk1 caddy project
Hi as you have seen on my other project I bought a mk1 caddy it's a d plate 1986 petrol.i dragged it off a farm which they had for over 10 years.it had not been used in years but lucky for me it was stored in a barn.when I got it home and had a better look at it I found the body work in better nick than I thought.i have fixed all the electrical problems now as nothing was working I've cleaned all the connections up.but in the end I changed the fuse board as it had water damage.i have also gave the car a full service ie cam belt,tensioner,coolant flush,oil,filter,air filter,plugs,dizzy cap,rotor arm,leads.and i gave the carb full clean as it was not working as it should,also the rocker cover gasket was leaking badly so changed that as well also cleaned the filter that in the rocker cover.the van is now running at last but I'm going to change the inlet gasket and the exhaust gasket as they need doing as well.last of all I fitted new vented front disc pads as they were soild disc on the van.and flexi hoses as the brakes were shot.my plans for the van is to get it repainted in Helios blue,some g60 steels,corrodo seats,and a new front screen and rear sliding Screen not to much as my other car needs finishing lol.will upload pics later today.
Posted
Old Timer
well not the best pics but this is how i found it on the farm the paint was well flat.
Posted
Old Timer
and after a bit of g3 and a wax
Posted
Old Timer
Posted
Old Timer
almost finished off the engine now just need to get some inlet manifold core plugs and i can fit all the new parts.also the battery tray was in bad condition so ive taken it off ready for a new to be fitted in a few weeks my plan is to get a mot on it in 2 or 3 weeks then start slowly doing the body work.i need a blower heater motor as well as it seized.any one got one going cheap.ive also taken the tow bar off which is for sale if any wants one.
Posted
Old Timer
Posted
Old Timer
Thanks bob,my plans are to getting it running and serviced which I will finish off this weekend then rebuild the callipers next week and then take it for a mot and then just use it as a daily runner still the summer.im not going to keep it £1400 you can have it bob.lol as I need to finish my other build.
Posted
Moderator
Sounds like you fell on your feet with this one mate. A few quid in the right areas will get her going again.
Posted
Old Timer
Yes was a good find and will be a nice caddy for someone once I've had a play with it.lol.
Posted
Settled In
it looks nice congrats on the find
Posted
Newbie
mike_turbo said
almost finished off the engine now just need to get some inlet manifold core plugs
Sorry to jump on here, where did you get your inlet manifold core plugs and what size are they? I called the dealer and they said they were discontinued and had no details of size etc.
Posted
Old Timer
As some of you no I sold this caddy a while back .the lad I sold it to has bought a few more parts to get it ready for its mot but never finished it off.So I viewed it today a decided to buy it back off him with all the parts.i will collect it next week ,what have I done lol.i think it needs a rear arch and fit the new parts he has and I can mot it then.and later down the line get it painted.
Posted
Old Timer
Looks like a good base!
1987 Caddy 1.6Turbo Diesel-GTD
Instagram: Cavscp
Instagram: Cavscp
Posted
Old Timer
4wd this as well Mike
Posted
Local Hero
what are you like lol
keep the progress updates coming :-)
keep the progress updates coming :-)
SOUTHWEST Regional Host. Bristol Meet - 1st Friday of the month - Toby Carvery Bradely Stoke Bristol Bristol Region Facebook Group
1.8T CABBY
TINTOP THREAD (SOLD 2016) SPORTLINE THREAD (SOLD 2015) CLIPPER THREAD (SOLD 2012)
1.8T CABBY
TINTOP THREAD (SOLD 2016) SPORTLINE THREAD (SOLD 2015) CLIPPER THREAD (SOLD 2012)
Posted
Old Timer
Baggie82 said
4wd this as well Mike
No way m8 lol.
0 guests and 0 members have just viewed this: None.