Oil pressure gauge 5 or 10 bar?
Posted
#1619871
(In Topic #221518)
Settled In
Hi
I'd like to add an oil pressure gauge when I install my rebuild DX engine. As far as I know the oil pressure should not exceed 5 bar under normal operation, but might do so with a cold engine. Would anyone recommend the 10 bar gauge?
I'd like to add an oil pressure gauge when I install my rebuild DX engine. As far as I know the oil pressure should not exceed 5 bar under normal operation, but might do so with a cold engine. Would anyone recommend the 10 bar gauge?
Early 77 year model Golf. 4-Door
Posted
Local Hero
I run 20w50 in my Cabriolet, and at start cold it pegs at 5bar, but as it warms it goes down to normal operating pressure as the Oil Temp goes up and the Car gets warmed.
Diesels would need a 10 or greater, but not Gassers.
Diesels would need a 10 or greater, but not Gassers.
What do Divorces, Great Coffee, and Car Electrics all have in common?
They all start with GOOD Grounds.
Where are my DIY Links?
They all start with GOOD Grounds.
Where are my DIY Links?
Posted
Settled In
Ok!👍
Early 77 year model Golf. 4-Door
Posted
Settling In
Oil pressure gauge 5 or 10 bar?
Yub, 5 bar should do fine it will nearly max it on cold starts but gives a better reading when normal operating.
0 guests and 0 members have just viewed this: None.