No brakes
Posted
#1372687
(In Topic #173892)
Newbie
cupra master cylinder upgrade
HELP!
I've Installed the cupra/focus master cylinder, bled the lines but have no pressure.
Pedal going to the floor. I have the 3mm spacer between the servo and the master cylinder.
Any ideas appreciated
I've Installed the cupra/focus master cylinder, bled the lines but have no pressure.
Pedal going to the floor. I have the 3mm spacer between the servo and the master cylinder.
Any ideas appreciated
Posted
Old Timer
Was the mater cylinder new or used? All lines are leak free and bled up correctly?
Posted
Newbie
It's a salvaged part. Looked good though
Posted
Newbie
It's a salvaged part. Looked good though and used an eezibleed. No leaks and no air bubbles
0 guests and 0 members have just viewed this: None.