Rear Axle /Hub End caps and washer

looking to know where i can get these from,
they are the end caps which go over the nut and split pin
when changing the rear bearings,
also there is a washer which goes in between the nut and last bearing on the outside with  a notch ,
are these dealer parts only?

Yo gourra has got a mk1 to break,told u to ring me back,its a 83 Gx 1.5 5 door,lots of goodies to be had  :wink:
Lee

i know soz mate got real; busy, i did ring late but u dint answer, where is this guy? gourra??

gourra is me bert,ive got a 83 GX for breaking,not my green one i brought another one
Lee

oh ok, let me knoiw when u breaking it, i found the washer and the old end caps, the caps are beaten but will have to do!!!

Got all those bits - they come in replacement bearing sets usually

well NO, funny enough they didnt and i bought my replacement set from GSF, had both bearings, oil seal, nut, split pin and nut cover for  the split pin, but no grease, or washer or end cap!

was told by them u have to get it from dealers

That's a bit poor - All rthe bearings I've done have had new end caps.  Maybe not grease or the easher tho'

Still - I have these used if you want them…