Anyone running ET0 wheels?
Posted
#921579
(In Topic #108861)
Settling In
Anyone running ET0 wheels?
Hi all,
I have been offered a set of 15'' 7J wheels in a porsche fitment that i am really keen on. They currently have an offset of ET20, and the lowest width adaptors to take them from 5x130 - 4x100 are 20mm, therefore taking the wheels to ET0. Was wondering if anyone was running anything similar?
Any pictures or other input would be great.
Alan
I have been offered a set of 15'' 7J wheels in a porsche fitment that i am really keen on. They currently have an offset of ET20, and the lowest width adaptors to take them from 5x130 - 4x100 are 20mm, therefore taking the wheels to ET0. Was wondering if anyone was running anything similar?
Any pictures or other input would be great.
Alan
Posted
Old Timer
et0 will put you miilllleeessss out of the body work, about 30mm out depeing upon the wheel width, this is just asking to e pulled over.
also it will put alot of stress on the wheel bearings and over suspension parts and mounts.
also im not a big fan of the adaptors as 2 bolts have very little meat around them on 1 side.
also it will put alot of stress on the wheel bearings and over suspension parts and mounts.
also im not a big fan of the adaptors as 2 bolts have very little meat around them on 1 side.
Daily - 05 plate B6 A4 Avant S Line, with 19s for the summer.. wifes car - Rare Seat Exeo ST Sport 170 Tech
Weekend - MK2 20vt monster - Plus a mk1 caddy I am fixing for my bro
Posted
Old Timer
i run 13x7j ats classics at et20 and the fronts are questionably legal!!!
as above, i wouldn't trust those adapters, asking for trouble that is.
ash
as above, i wouldn't trust those adapters, asking for trouble that is.
ash
Posted
Settling In
Ah ok doesnt sound like it will be worth while then. Thanks
0 guests and 0 members have just viewed this: None.