Wiring on a vr6 powered softop help needed

Right,the wiring seems to be abit of a mess on it,I need a few pointers,it uses the mk3 vr6 engine loom with the mk1 chassis loom etc,got everything working apart from the oil light,the battery light and the biggest thing is that it's not charging,would this be down to the small blue wire on the back of the alternator,seems tobe connected but need to trace it back to the fuse board etc,does any not the pin postion on the fuse box and where it should go along with the oil light too,this is the thing about building a car up that someone else has built years ago!lol
Cheers mark

yeah blue wire is what does the charging, see my sign jetta89.pdf if you have the later blade fusebox that'll show you everything you need to know about the fusebox wiring, also check the fusebox sticky

rubjonny said

yeah blue wire is what does the charging, see my sign jetta89.pdf if you have the later blade fusebox that'll show you everything you need to know about the fusebox wiring, also check the fusebox sticky

Any link to it so I can have a look?
Cheers 

its in my sig, see below my post