Skip navigation

removal of fuel injectors...?

Post

Back to the top

removal of fuel injectors...?

hey,

   does anyone know how to remove fuel injectors from a kr 16v, do tou have to remove the inlet manifold or can they just pull out…? cheers sean

Post

Back to the top
they just pull out
Regards Volkswarren

X2 1983 A REG EW CAMPAIGN In WHITE(Awaiting full rebuild solid body) :thumbs: & T Reg S1 GTi Project, Still Looking for Series 1 GTi's or a 16S Oettinger to restore (Complete Cars only)  or an A reg Lhasa Green or White Gti to restore, also consider  Black, Red or Blue, Also Golf Driver Project Wanted anything considered WHY

Post

Back to the top
Ok cheers, tried to remove them earlier by pulling them out but had no luck, screwed on an old fuel line fitting and had a pull. will have have another blast, cheers

Post

Back to the top
There is a tool /bracket you can buy that makes it a lot easier , try a search on ebay
Mk1 2l TSR G60.  .getting. There twice as fast

Mk1 lhd diesel…….getting. There for half the cost

Post

Back to the top
ok will take a look. is it just a case of chapping them in when there to be re-fitted....?

Post

Back to the top
Yes, but best to fit new seals as the old ones go hard & brittle and can be a major cause of air leaks if this happens.
'81 1.8T
BMW R1200GSA
Caddy 2k 1.8T

Post

Back to the top
Will do cheers for the help!
0 guests and 0 members have just viewed this: None.