HELP Mk1 vr6 conversion
Posted
#1307886
(In Topic #157628)
Settling In
Mk1 vr6 conversion
Also, any pointers, hints tips and niggles please
Dave
Last edit: by natodubz
Posted
Settled In
VR6 campaign
My car was originally a 83 campaign so it had the big block mounts. These were taken off by a previous owner and Mk4 Golf mounts have been welded onto the chassis legs. The front has been braced to take the extra weight of the VR6 lump, it all fits pretty well.
The wiring is the CE2 MK3 Golf loom for the entire car, except the rear wiring harness for the fuel pump, lights and rear window etc. I'm using later cabby hubs and 100mm driveshafts, but the passenger side one needs shortening.
Otherwise, i think Justcaddys.com do the conversion mounts here:
http://www.justcaddys.…ine-mount-conversion.html
Posted
Settling In
0 guests and 0 members have just viewed this: None.