mk1 16v question

Hi just sorting my isv wiring loom on my golf and the yellow and black from the loom goes to the tps plug but i do not where the other 2 wires that are on the tps plug go to they are one black and one white i think the white one went to a plug that went to the air box and the black one went to the main engine bay wiring plug off the mk2 but i do not know what to do with them now , thanks Sam

any use?  :wink:

yes, thanks
 from the bottom diagram i can see i dont need the white wire but the black one seems to go to a box with a number 8 on i take it this is a mk2 wiring diaram i just need to now where to connect it on my mk1 loom/fusebox or ecu.
thanks Sam

On the lower diagram it goes to 8, but from the top guide it goes to a perm Live, Which Pin 15 on the Control Unit also does.   I take it that means you can either go striaght to a live, or go 'via' Pin 15 which will already be connected to Live.  

Thats just going from the guide, I havent wired one up myself.

Fraid I don't have a mk2 haynes on me, left it back at my parents.

i hate wiring good info there manic one 8)  8)