Help with AGU turbo pipes

Hi,

Can anybody tell me what the outlet/inlet is for on the metal part of the turbo inlet pipe?

I know all the other pipes to the N75 valve and waste gate etc, but this outlet on the tip is confusin me…

Cheers

have you got a picture m8? as im thinking you mean the 90 degree metal pipe with two nipples on it?

Think he is on about the evap pipe on the turbo intake pipe at the bottom near the turbo end.

You won't need it so block it off.

just readed post again it does say tip    that can be blocked

Make sure on the loom side of things if you have gone OEM to put a solenoid in place of the evap to keep the ecu happy or if you have immo removed you can have the evap map out to.

Thanks for the help guys, bit more research last night and I found out it was for the evap system and wasn't needed so blocked it off today…

I have had my ecu unlocked and immo bypassed so will get it mapped out…

Thanks again

bad_boy_gti said

Thanks for the help guys, bit more research last night and I found out it was for the evap system and wasn't needed so blocked it off today…

I have had my ecu unlocked and immo bypassed so will get it mapped out…

Thanks again

No probs glad you got it sorted