Car boffins.. Can i use a LHD complete car and engine loom?
Posted
#827734
(In Topic #98852)
Settling In
Car boffins.. Can i use a LHD complete car and engine loom?
I have been having a nightmare sourcing a complete loom for my car. I have found a LHD loom which is complete with all wires including fuse box, ecu, mfa clocks, etc. Can i use this loom? Apart from the loom being mounted on the other side of the car i dont see a prob. As essentially its just a loom flipped over. Can anyone confirm this, as its in good knick.
Also do mk2 scirocco looms fit mk1?s?
i have an 89 clipper carb converting to injection.
Also do mk2 scirocco looms fit mk1?s?
i have an 89 clipper carb converting to injection.
Golf Clipper 1.8 Carb F Reg in Blue
mods and work so far:
mk4 rear disk
vr6 calipers and g60 disks
9" servo and 16v master cylinder
h&R adapters and d90?s 6" front 8" rear
webber carb
inlet manifold, rocker cover & exhaust mani gaskets
mods and work so far:
mk4 rear disk
vr6 calipers and g60 disks
9" servo and 16v master cylinder
h&R adapters and d90?s 6" front 8" rear
webber carb
inlet manifold, rocker cover & exhaust mani gaskets
Posted
Local Hero
the lhd loom will be to short i think it will never reach the clocks :wink:
Posted
Settling In
cheers, gone a different route now..
Golf Clipper 1.8 Carb F Reg in Blue
mods and work so far:
mk4 rear disk
vr6 calipers and g60 disks
9" servo and 16v master cylinder
h&R adapters and d90?s 6" front 8" rear
webber carb
inlet manifold, rocker cover & exhaust mani gaskets
mods and work so far:
mk4 rear disk
vr6 calipers and g60 disks
9" servo and 16v master cylinder
h&R adapters and d90?s 6" front 8" rear
webber carb
inlet manifold, rocker cover & exhaust mani gaskets
0 guests and 0 members have just viewed this: None.